Series 

Ons assortiment LED controllers is met zorg samengesteld om voor iedere LED lichtbron en elk mogelijk LED project een passende oplossing te kunnen bieden. Wij leveren DMX controllers, DALI, 0-10V, triac en andere oplossingen ontworpen voor de professionele verlichtingsmarkt. 

Subcategorieën

DMX512 Master controller

DMX512 Master controller is the output signal of international standard DMX512/1990. It not only can control all the LED lights that receiving the standard DMX signal in the market, but also can work with our DMX decoder to control the general LED lights without DMX512.

  • WiFi-RDM01

    WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.

    € 153,54 -15% € 130,51
  • EX4S

    - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. -  Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.

    € 99,75 -15% € 84,79
  • EX7S

    - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - No limit the quantity of drivers in each zone, and all color modes keep synchronously. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Compatible with remote and APP control.

    € 107,07 -15% € 91,01
  • EX8S

    - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly.  - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation.  - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers.  - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group.  - Support multiply panels linkage control, no quantity limitation.  - Touch keys with chord and LED indicator.  - Compatible with remote and APP control. - No limit the quantity of drivers in each zone, and all color modes keep synchronously

    € 114,98 -15% € 97,73
  • UX5

    The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.

    € 130,66 -15% € 45,73
  • UX8

    The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.

    € 152,15 -15% € 129,33
  • DX7

    Met de DX7 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 86,36 -15% € 30,23
  • LT-870S

    Met deze DMX tranceiver kunt u DMX ontvangen of zenden, heeft een working frequency van 2.4Ghz en daarin is de mogelijkheid om tussen 64 verschillende kanalen te kiezen. (opererend tussen de 2.401Hz en 2.464hz). De maximale afstand is tussen de 300 meter. werkt op een voeding van 5 tot 24 volt.

    € 127,00 -15% € 107,95
  • DX2

    Met de DX2 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 86,36 -15% € 30,23
  • DX1

    Met de DX1 LED Dimmer(0%-100%) kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. de DX1 werkt op 110-240V en maakt gebruik van DMX en RF voor de aansturing. Werkt samen met de R4-5A en de R4-CC ontvanger en is in combinatie te gebruiken met de Wifi-104 controller.

    € 71,44 -15% € 25,00
  • DX62

    Met de DX62 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via de draaiknop. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 74,94 -15% € 26,23
  • DX6

    Met de DX6 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 86,36 -15% € 30,23
  • UX1

    The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.

    € 102,93 -15% € 36,03
  • UX2

    The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.

    € 116,56 -15% € 40,80
  • D1

    Geschikt voor 12-24V installaties, de single zone versies gebruiken PWM waardoor je direct een LED strip erop kan aansluiten.

    € 64,78 -15% € 22,67
  • D2

    Geschikt voor 12-24V installaties, de single zone versies gebruiken PWM waardoor je direct een LED strip erop kan aansluiten.

    € 71,44 -15% € 25,00
  • D4

    Geschikt voor 12-24V installaties, de single zone versies gebruiken PWM waardoor je direct een LED strip erop kan aansluiten. 

    € 86,36 -15% € 30,23
  • D7

    Geschikt voor 12-24V installaties, de single zone versies gebruiken PWM waardoor je direct een LED strip erop kan aansluiten. Voor de 4 zone versies maakt de wandcontroller gebruik van DMX.

    € 86,36 -15% € 30,23
  • EX61

    - Adopt RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation.  - Wireless within effective range, any quantity of receivers can be connected and maintain synchronous effect.  - With the function of dimming and switching. - The panel can be controlled by remote, or by mobile phone if add a gateway.

    € 75,92 -15% € 64,53
Toont 1 - 0 van 1 item

CV DMX512 Decoder

DMX Decoder adopted the advanced micro-electronic control technology to convert universal DMX512/1990 digital signal to CC/CV PWM signal to drive LED, which controlled by DMX512 console, realize 0-100% brightness or various changing effect. And can control single color, dupi-color, RGB, RGBY, RGBW, RGBA LED lights.

  • LT-820-5A

    DMX LED controller met display, zodat het startadres eenvoudig afgelezen en aangepast kan worden. Is geschikt om constant voltage LED aan te sturen, zet een DMX512 signaal om in een PWM signaal en is in staat 16 of 8Bits te dimmen. De controller heeft 4 output kanalen van 5 Ampere. Werkt op een voeding van 5 of 24 volt.

    € 125,12 -15% € 106,35
  • LT-858-5A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. De controller heeft 4 output kanalen van 5 Ampere. Werkt op een voeding van 12 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit en heeft een RJ45 DMX512 socket.

    € 75,00 -15% € 63,75
  • LT-811-12A

    DMX LED controller met display, zodat het startadres eenvoudig afgelezen en aangepast kan worden. Is geschikt om constant voltage LED aan te sturen, zet een DMX512 signaal om in een PWM signaal. De controller heeft 1 output kanaal van 12 Ampere. Werkt op 12 of 24 volt. Bij 12V kan het 120W vermogen en bij 24V kan het 240W vermogen aan.  Daarnaast kan een 0-10V dimming signaal uitgestuurd worden.

    € 95,77 -15% € 81,40
  • LT-840-6A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. Ondersteunt het standaard RDM protocol en Bi-directional communication. De controller heeft 4 output kanalen van 6 Ampere. Werkt op een voeding van 5 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit en een RJ45, XLR-3 en Green terminal DMX512 socket. 

    € 117,94 -15% € 100,25
  • LT-880

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. Ondersteunt het standaard RDM protocol en Bi-directional communication. De controller heeft 24 output kanalen van 3 Ampere. Werkt op een voeding van 5 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit en een RJ45, XLR-3 en Green terminal DMX512 socket.

    € 296,00 -15% € 251,60
  • LT-851-6A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. De controller heeft 3 output kanalen van 6 Ampere. Werkt op een voeding van 5 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit.

    € 65,28 -15% € 55,49
  • LT-905-OLED

    € 105,10 -15% € 89,34
  • LT-995-OLED

    The 5-channel  OLED DMX decoder is suitable for applications where DIM, CT, RGB, RGBW and RGBWY modules must be controlled with a DMX signal. In case you are using RGBW FlexStrip a maximum of 1 module can be connected. With the Dimming this will be 5 modules. It has 5 channels of 6A (30A max) and a maximum power of 720W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: Green terminal, RJ45 and XLR-3. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve. 

    € 109,79 -15% € 93,32
  • LT-912-OLED

    € 186,87 -15% € 158,84
  • LT-932-OLED

    € 317,68 -15% € 270,03
  • DIN-DMX-4CH

    De DIN-DMX-4CH is een DMX LED controller met een handig digitaal display die het mogelijk maakt om eenvoudig het startadres te lezen en handmatig aan te passen. Is geschikt om Constant Voltage LED aan te sturen en wordt veel gebruikt in grote installaties waarbij veel LED wordt gebruikt. Dit product onderscheidt zich doordat het zowel over een DIN-Rail als normale schroefmontage beschikt.

    € 110,95 -15% € 94,31
  • LT-854-5A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. De controller heeft 4 output kanalen van 5 Ampere. Werkt op een voeding van 12 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bi

    € 75,00 -15% € 63,75
  • LT-853-6A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. De controller heeft 3 output kanalen van 6 Ampere. Werkt op een voeding van 12 tot 24 volt. Heeft een gray scale van 256 levels per kanaal en heeft RJ45 DMX512 socket.

    € 63,22 -15% € 53,74
  • LT-8030

    DMX LED controller geschikt om constant voltage LED aan te sturen is geschikt voor met name de kleinere LED installaties waar een beperkt vermogen noodzakelijk is. Zet een DMX512 signaal om in een PWM signaal. De controller heeft 3 output kanalen van 4 Ampere. Werkt op een voeding van 5 tot 24 volt. Heeft een standaard XLR-3, Green terminal DMX512 Socket.

    € 78,36 -15% € 27,43
  • LT-830-8A

    DMX LED controller geschikt om constant voltage LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. Ondersteunt het standaard RDM protocol en Bi-directional communication. De controller heeft 3 output kanalen van 8 Ampere. Werkt op een voeding van 5 tot 24 volt. Heeft een RJ45, XLR-3 en Green terminal DMX512 socket.

    € 97,94 -15% € 83,25
  • LT-916-OLED

    - Designed for Hi-power multiple channels application, 16 channels output, and Max. 3A current per channel, up to 1152W output power. - Easy operation with OLED screen and touch buttons. - 4 kinds of mode optional: single color, color temperature, RGB, RGBW. - Support 3 kinds of DMX ports with signal isolation function: 5-pin XLR, RJ45 and green terminal (with signal amplifier function). - With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting, equipment recognition, etc. - With photoelectric isolation function. - With short circuit protection and over current protection, as well as warning function when fault. - With fast self-testing function. - 16bit (65536 levels) / 8bit (256 levels) grey level optional. - Multiple dimming curve (0.1~9.9) optional.

    € 266,18 -15% € 226,25
Toont 1 - 0 van 1 item

CC DMX512 Decoder

DMX Decoder adopted the advanced micro-electronic control technology to convert universal DMX512/1990 digital signal to CC/CV PWM signal to drive LED, which controlled by DMX512 console, realize 0-100% brightness or various changing effect. And can control single color, dupi-color, RGB, RGBY, RGBW, RGBA LED lights.

  • LT-880-350

    LT-880-350 with the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master controller must recognize the RDM protocol). This compact decoder works with DMX512 console. Realize 0-100% brightness and various changing effect. Equiped with DMX standard XLR-3, RJ45 and green terminal interface, easy to operate. And it can control single color, bi-color, RGB LED lights.

    € 286,00 -15% € 243,10
  • DIN-DMX-350

    DMX LED controller met display, zodat het startadres eenvoudig afgelezen en aangepast kan worden. Is geschikt om constant  current  LED aan te sturen, zet een DMX512 signaal om in een PWM signaal. De controller heeft 3 output kanalen waar elk 350 miliAmpere uitkomt. Werkt op een voeding van 12 tot 48 volt en stuurt een voltage van 3-42V eruit. Is makkelijk aansluitbaar op een DIN-Rail.

    € 112,73 -15% € 39,46
  • LT-830-700

    DMX LED controller geschikt om constant  current  LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. Ondersteunt het standaard RDM protocol en Bi-directional communication. De controller heeft 3 output kanalen met 700mA per kanaal. Is geschikt om 700mA High Power LED's aan te sturen. Je kunt maximaal 12 High Power LED's aansluiten op 1 controller. Werkt op een voeding van 12 tot 48 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit en een XLR-3, RJ45 en Green terminal DMX512 socket.

    € 97,94 -15% € 34,28
  • LT-840-700

    DMX LED controller geschikt om constant current LED aan te sturen. Zet een DMX512 signaal om in een PWM signaal. Ondersteunt het standaard RDM protocol en Bi-directional communication. De controller heeft 4 output kanalen met 700mA per kanaal. Is geschikt om 700mA High Power LED's aan te sturen. Je kunt maximaal 12 High Power LED's aansluiten op 1 controller. Werkt op een voeding van 12 tot 48 volt. Heeft een gray scale van 256 levels per kanaal en werkt op 8bit en een XLR-3, RJ45 en Green terminal DMX512 socket

    € 117,94 -15% € 41,28
  • DIN-DMX-350-4CH

    - Dimming interface: MX512, RDM - PWM digital dimming, no alter LED color rendering index. - Dimming range: 0~100%, LED start at 0.1% possible. - 4CH output, 350mA per channel. - Full protective plastic housing. - Suitable for indoor environments.

    € 130,56 -15% € 45,70
  • LT-880-700

    LT-880-700 with the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master controller must recognize the RDM protocol). This compact decoder works with DMX512 console. Realize 0-100% brightness and various changing effect. Equiped with DMX standard XLR-3, RJ45 and green terminal interface, easy to operate. And it can control single color, bi-color, RGB LED lights.

    € 288,58 -15% € 245,29
  • LT-858-CC

    LT-858-CC with the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master controller must recognise the RDM protocol). Realise 0-100% dimming or different lighting effects; works with DIM, CT, RGB,RGBW.

    € 81,55 -15% € 69,32
Toont 1 - 0 van 1 item

DMX-SPI signal type

DMX-SPI signal decoder is to convert the DMX512 digital signal into SPI(TTL) digital signal. It can work on the DMX console to control the LED lights with compatible driving ICs. DMX console can control every channel of the LED Lights, realizing 0-100% dimming and various changing effect.

Our DMX decoder can control LED lights based on following driving ICs: MBI6120, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, TLS3001, TLS3002, WS2801, WS2803, WS2811, WS2812, P9813 IC etc.

The grey scales of DMX decoder depends on the driving IC, the above driving ICs are with a built-in grey scale processor and occupy 70-80% of LED digital lighting market, use our DMX-SPI decoder can simply turn normal LED digital light to DMX512 LED light with international standard communication protocol, which is easy to promote in the international market.

DMX-SPI decoders are widely used in the LED string light, LED dot light, SMD flexible strip, LED digital tube, wall light, pixel screen, high power spot light, wall washer and kinds of LED digital lights.

  • DMX-SPI-202

    De DMX-SPI-controller met OLED-scherm is eenvoudig te gebruiken. Hij is aansluitbaar op de volgende ICs:  M1804 TM1809 TM1812 UCS1903 UCS1909 UCS1912 UCS2903 UCS2909 UCS2912 TM1803 TLS3001 TLS3002 LPD6803 LPD1101 D705 UCS6909 UCS6912 LPD8803 LPD8806 WS2801 WS2803 WS2811 WS2812B P9813. Werkt op een voeding van 5 tot 24V, heeft 16 change modes, en 1024  pixels control quantity.

    € 153,50 -15% € 130,48
  • DMX-SPI-201

    De DMX-SPI-controller is eenvoudig te gebruiken. Hij is aansluitbaar op de volgende ICs:  M1804 TM1809 TM1812 UCS1903 UCS1909 UCS1912 UCS2903 UCS2909 UCS2912 TM1803 TLS3001 TLS3002 LPD6803 LPD1101 D705 UCS6909 UCS6912 LPD8803 LPD8806 WS2801 WS2803 WS2811 WS2812B P9813. Werkt op een voeding van 5 tot 24V, heeft 16 change modes en een gray scale van 256 levels per kanaal en werkt op 8bit

    € 138,79 -15% € 117,97
  • SPI-16S

    LED controller geschikt om een groot aantal verschillende pixelstrips mee aan te sturen. Je kunt met de afstandsbediening wisselen tussen 16 voorgeprogrammeerde programma's. Op de controller kan maximaal 10 Ampere worden aangesloten en werkt op een voeding van 5 tot 24 Volt. komt met een afstandbediening. Kan met bijna alle ICs werken.

    € 64,87 -15% € 55,14
  • LT-DMX-1809

    Deze DMX-to-DiGi controller is geschikt voor de volgende IC's: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909 & UCS1912. De greyscale voor deze controller is 256, waarmee vloeiende kleurovergangen gegarandeerd zijn. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket. 

    € 97,94 -15% € 83,25
  • DMX-SPI-203

    De DMX-SPI-controller met OLED-scherm is eenvoudig te gebruiken. Hij is aansluitbaar op de volgende ICs:  M1804 TM1809 TM1812 UCS1903 UCS1909 UCS1912 UCS2903 UCS2909 UCS2912 TM1803 TLS3001 TLS3002 LPD6803 LPD1101 D705 UCS6909 UCS6912 LPD8803 LPD8806 WS2801 WS2803 WS2811 WS2812B P9813. Werkt op een voeding van 5 tot 24V, heeft 540 change modes, en 1024 pixels control quantity. Komt samen met de M203 remote.

    € 248,60 -15% € 211,31
  • LT-DMX-8806

    Deze DMX-to-DiGi controller is geschikt voor de volgende IC's: LPD8803 en LPD8806. De greyscale voor deze controller is 256, waarmee vloeiende kleurovergangen gegarandeerd zijn. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket.

    € 97,94 -15% € 34,28
  • LT-DMX-6803

    Deze DMX-to-DiGi controller is geschikt voor de volgende ICs: LPD6803, LPD1101, D705, USC6909 en USC6912. Deze controller wordt o.a. gebruikt voor de aansturing van onze DiGidot producten. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket.

    € 97,94 -15% € 34,28
  • LT-DMX-3001

    Deze DMX-to-DiGi controller is geschikt voor de volgende IC's: TLS3001 en TLS3002. De greyscale voor deze controller is 256, waarmee vloeiende kleurovergangen gegarandeerd zijn. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket.

    € 97,94 -15% € 34,28
  • LT-DMX-9813

    Deze DMX-to-DiGi controller is geschikt voor de volgende IC: P9813. De greyscale voor deze controller is 256, waarmee vloeiende kleurovergangen gegarandeerd zijn. Werkt op een voeding van 5 tot 24V, heeft een XLR-3 Green terminal DMX512 Socket.

    € 97,94 -15% € 34,28
Toont 1 - 0 van 1 item

CV DMX512 Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- Standard logarithmic dimming curve, the human eye visual feel more comfortable
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature /Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

Toont 1 - 0 van 1 item

CC DMX512 Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
-PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- Standard logarithmic dimming curve, the human eye visual feel more comfortable
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>85%, THD(Total Harmonic Distortion)<10%
- Wide rang voltage+optional arbitrary current, workable with led lights at different power
- Short circuit / Over-temperature /Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply,full protective plastic housing
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-20-250-1000-W2M2

    - Dimming interface: DMX512/RDM, Push Dim - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - With soft-on and fade in function, visual more comfortable. - DIP switch for 16 optional currents' quick selection. - 0-100% flicker-free,High frequency exemption level. - Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable. - In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W Innovative thermal management technology, intelligent power life protection. - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 76,55 -15% € 65,07
  • SE-12-350-700-W1M

    - Dimming interface: DMX512/RDM - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 35,75 -15% € 30,39
  • SE-12-100-400-W1M

    - Dimming interface: DMX512/RDM - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 35,75 -15% € 30,39
  • DMX-10-350-700-F1P1

    Een Constant current DMX driver met ingebouwde voeding Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 2,1 tot 9,8W, 700mA en spanning range van 10 tot 14VDC.NOTE! Dit product komt in 700mA standaard versie! Is op aanvraag ook verkrijgbaar in 350mA, 400mA, 450mA, 500mA, 550mA, 600mA of 650mA versies. Om aan te vragen stuur een mail naar info@ltech-led.eu or sales@inventdesign.nl

    € 31,02 -15% € 10,86
  • DMX-10-100-400-F1P1

    Een Constant current DMX driver met ingebouwde voeding Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 3,5 tot 9,8W, 350mA en spanning range van 10 tot 28VDC.NOTE! Dit product komt in 350mA standaard versie! Is op aanvraag ook verkrijgbaar in 100mA, 150mA, 200mA, 250mA, 300mA of 400mA versies. Om aan te vragen stuur een mail naar info@ltech-led.eu or sales@inventdesign.nl

    € 31,02 -15% € 10,86
  • DMX-25-150-900-E1A1

    Een Constant current DMX driver met Integrated Power Supply. Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 0,54 tot 25W. De stroom range gaat van 150 tot 900mA en komt 10-54V uit.

    € 86,36 -15% € 73,41
  • DMX-15-100-700-E1A1

    - Dimming interface: DMX512/RDM, Push Dim.- With RDM remote device management protocol.- PWM digital dimming, no alter LED color rendering index.- Dimming range: 0~100%, LED start at 0.1% possible.- Multi-current & wide voltage, suitable for different power LED.- Short circuit / Over-heat / Over load / Non-load protection, recover automatically.- Non-load output voltage 0V to prevent damages to LED caused by poor contact.- Class 2 power supply. Full protective plastic housing.- Compliant with Safety Extra Low Voltage standard.- Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 74,94 -15% € 63,70
  • DMX-36-200-1200-E1A1

    € 92,59 -15% € 78,70
Toont 1 - 0 van 1 item

DMX Signal amplifier

DMX Signal Amplifier is dedicated to amplify, distribute, and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512.

- It’s specially designed for signal shaping amplification for DMX512 signal which attenuated after a long-distance transmission, realize extending the signal transmission distance.
- Need to use the multiple signals expansion output control, increase DMX l signal amplifier to distribute multi-channel control.
- 1 channel input, 2-3 channels distributed output, there is a independently photoelectricity insulation of >3KV between Input and output terminals, and output terminals among 3 channels, so as to avoid the expensive equipment such as light, DMX driver, precise digital lighting controller, being burnt by the possible high voltage which caused from the wrong wire connection and a broken equipment, also can avoid the signal interference between each DMX equipment, to assure it works safely.

Toont 1 - 0 van 1 item
  • WiFi-RDM01

    WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.

    € 153,54 -15% € 130,51
Toont 1 - 0 van 1 item
  • ARTNET-DMX-1

    Deze Artnet Node is geschikt voor een DMX-output of DMX-input dit kunt u instellen met de dip-switches. Met deze Node kan eenvoudig gecommuniceerd worden vanuit de MADRIX software naar de LED Setup en vanuit een DMX controller om het LED te bedienen. Werkt op een voeding van 5 tot 24 volt.

    € 245,77 -15% € 208,90
  • ARTNET-DMX-2

    Deze Artnet Node is geschikt voor twee DMX-output. Hiermee kan eenvoudig gecommuniceerd worden vanuit bijvoorbeeld de MADRIX software naar de LED Setup en zijn 340 LED's aan te sturen. Werkt op een voeding van 5 tot 24 volt.

    € 245,77 -15% € 208,90
  • ArtNet-SPI-1

    Deze Art-net Node is geschikt om het Art-net signaal om te zetten in SPI(TTL). Deze controller is aansluitbaar op de volgende ICs:  M1804 TM1809 TM1812 UCS1903 UCS1909 UCS1912 UCS2903 UCS2909 UCS2912 TM1803 TLS3001 TLS3002 LPD6803 LPD1101 D705 UCS6909 UCS6912 LPD8803 LPD8806 WS2801 WS2803 WS2811 WS2812B P9813. Werkt op een voeding van 5 tot 24 volt.

    € 299,25 -15% € 254,36
Toont 1 - 0 van 1 item

CV DALI Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • LM-75-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 115,39 -15% € 98,08
  • LM-75-12-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 115,39 -15% € 98,08
  • LM-75-24-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 109,06 -15% € 92,70
  • LM-75-12-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 109,06 -15% € 92,70
  • DALI-36-24-F1P1

    € 49,12 -15% € 41,75
  • LM-100-24-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 122,14 -15% € 103,82
  • LM-100-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 133,12 -15% € 113,15
  • LM-150-12-G1D2

    - Dimming interface: DALI 2.0, Push DIM - Dimming range from 0-100%, LED start at 0.1% possible. - 0~100% flicker-free, High frequency exemption level. - High Efficient driver. Efficiency 93%. PF>0.98, THD<6%. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing with design of dismountable end cover - DALI bus standard: IEC62386-101,102,207. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - Up to 50000-hour life time 5 years warranty(Rubycon capacitor)

    € 154,48 -15% € 131,31
  • LM-150-24-G1D2

    - Dimming interface: DALI 2.0, Push DIM - Dimming range from 0-100%, LED start at 0.1% possible. - 0~100% flicker-free, High frequency exemption level. - High Efficient driver. Efficiency 93%. PF>0.98, THD<6%. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing with design of dismountable end cover - DALI bus standard: IEC62386-101,102,207. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - Up to 50000-hour life time 5 years warranty(Rubycon capacitor)

    € 154,48 -15% € 131,31
  • LM-150-12-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Full protective plastic housing with design of dismountable end cover - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - 5 years warranty(Rubycon capacitor)

    € 156,65 -15% € 133,15
  • LM-150-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Full protective plastic housing with design of dismountable end cover - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - 5 years warranty(Rubycon capacitor)

    € 156,65 -15% € 133,15
  • DALI-15-100-400-F1P1

    Een Constant current DALI driver met Integrated Power Supply. Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 0,3 tot 15W. De stroom range gaat van 100 tot 400mA en komt 3-54V uit.

    € 73,76 -15% € 25,82
Toont 1 - 0 van 1 item

CC DALI Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-20-250-1000-W2D2

    - Dimming interface: DALI DT8, Push DIM  - T-PWM digital dimming.  - Dimming range: 0~100%, LED start at 0.01% possible.  - DALI DT8 CT adjustment driver.  - 0-100% flicker-free (IEEE 1789 standard).  - Innovative thermal management technology, intelligent power life protection.  - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically.  - In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W.  - DALI bus standard: IEC62386-101,102, 209. Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.  - 5 years warranty (Rubycon capacitor).

    € 76,55 -15% € 65,07
  • SE-12-350-700-W1D

    - Dimming interface: DALI. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - DALI dimming curve: liner curve or logarithmic curve. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard.

    € 46,73 -15% € 39,72
  • SE-12-100-400-W1D

    - Dimming interface: DALI. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - DALI dimming curve: liner curve or logarithmic curve. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application forⅠ/Ⅱ/Ⅲ

    € 46,73 -15% € 39,72
  • DALI-25-150-900-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 81,87 -15% € 69,59
  • DALI-15-100-700-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 73,76 -15% € 62,70
  • DALI-36-200-1200-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 94,94 -15% € 80,70
  • DALI-50-500-1750-F1P1

    Een Constant current DALI driver met Integrated Power Supply. Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 5 tot 50W. De stroom range gaat van 500 tot 1750mA en komt 10-54V uit.

    € 102,17 -15% € 35,76
  • LT-401-CC

    Deze DALI LED LED controller is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 1 output, waar je maximaal 12 High Power LED's op kunt aansluiten. De controller kan ingesteld worden op 350, 700 of 1050mA sturing, afhankelijk van de gebruikte LED's. Kan worden aangesloten op een voeding van 12 tot 48 Volt.

    € 86,36 -15% € 30,23
Toont 1 - 0 van 1 item
  • LT-404-5A

    Deze DALI LED LED controller is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 1 PWM output signaal en 4 kanalen output van 5 Ampere. Kan worden aangesloten op een voeding van 12 tot 24 Volt. 

    € 97,94 -15% € 83,25
  • LT-401-12A

    Deze DALI LED LED controller is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 2 output signalen, namelijk PWM (12A) en een 0-10V signaal. Kan worden aangesloten op een voeding van 12 tot 24 Volt.

    € 86,36 -15% € 73,41
  • DIN-411-12A

    Deze DIN Rail DALI LED controller is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 2 output signalen, namelijk een 10A en een 0-10V signaal. Deze LED controller kan gemakkelijk op een DIN Rail bevestigd worden. Kan worden aangesloten op een voeding van 12 to 24 Volt.

    € 86,36 -15% € 73,41
  • LT-451-12A

    Deze LED Driver DALI 1x12A is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 2 output signalen, namelijk een 10A en een 0-10V signaal. Door middel van een OLED scherm kan het manual adressing, grouping en scenario editing aan, zonder gebruik van computer software of DALI editor. Kan worden aangesloten op een voeding van 12 tot 24 Volt.

    € 104,80 -15% € 89,08
  • LT-454-5A

    Deze DALI LED LED controller is geschikt voor het dimmen van LED strips d.m.v. een DALI signaal. De controller heeft 4 output kanalen van 5 Ampere. Door middel van een OLED scherm kan het manual adressing, grouping en scenario editing aan, zonder gebruik van computer software of DALI editor. Kan worden aangesloten op een voeding van 5 tot 24 Volt.

    € 131,98 -15% € 46,19
Toont 1 - 0 van 1 item
  • EDA4

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 99,60 -15% € 84,66
  • EDA3

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 89,90 -15% € 76,42
  • EDA2

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 84,55 -15% € 71,87
  • EDA1

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 78,36 -15% € 66,61
  • DALI-PS-DIN

    De DALI Bus Power Supply zet een spanning tussen 100 en 240 Volt om in een 200mA signaal die gebruikt kan worden voor alle DALI Drivers en Dimmers. Is makkelijk aansluitbaar op een DIN RAIL.

    € 96,03 -15% € 81,63
  • LT-424-G2

    De DALI Dubble Group Push Switch is een koppelstuk die achter elke puls schakelaar geplaatst kan worden. Hij werkt op DALI power, bv. de DALI BUS PS-MINI, en geeft een DALI signaal uit. die ontvangen kan worden door CV en CC DALI Drivers. Die drivers staan in verbinding met de LED verlichting. Door middel van deze push switch kan er via een puls schakelaar, digital touch switch of doorbell switch DALI intelligent control plaatsvinden. De DALI Dubble Group Push Switch stuurt groepen aan en kan er 0-15 bedienen.

    € 47,94 -15% € 16,78
  • LT-424-GC

    De DALI Group Push Switch is een koppelstuk die achter elke puls schakelaar geplaatst kan worden. Hij werkt op DALI power, bv. de DALI BUS PS-MINI, en geeft een DALI signaal uit. die ontvangen kan worden door CV en CC DALI Drivers. Die drivers staan in verbinding met de LED verlichting. Door middel van deze push switch kan er via een puls schakelaar, digital touch switch of doorbell switch DALI intelligent control plaatsvinden. De DALI Group Push Switch stuurt groepen aan en kan er 0-15 bedienen.

    € 47,94 -15% € 16,78
  • LT-424-U2

    De DALI Double Address Push Switch is een koppelstuk die achter elke puls schakelaar geplaatst kan worden. Hij werkt op DALI power, bv. de DALI BUS PS-MINI, en geeft een DALI signaal uit. die ontvangen kan worden door CV en CC DALI Drivers. Die drivers staan in verbinding met de LED verlichting. Door middel van deze push switch kan er via een puls schakelaar, digital touch switch of doorbell switch DALI intelligent control plaatsvinden. De Double Address push switch kan 0-63 adressen bedienen.

    € 47,94 -15% € 16,78
  • LT-424-UC

    De DALI Address Push Switch is een koppelstuk die achter elke puls schakelaar geplaatst kan worden. Hij werkt op DALI power, bv. de DALI BUS PS-MINI, en geeft een DALI signaal uit. die ontvangen kan worden door CV en CC DALI Drivers. Die drivers staan in verbinding met de LED verlichting. Door middel van deze push switch kan er via een puls schakelaar, digital touch switch of doorbell switch DALI intelligent control plaatsvinden. De adress push switch kan 0-63 adressen bedienen.

    € 47,94 -15% € 16,78
  • LT-424

    -          6 in 1 function: single address single switch, single address double switch, single group single switch, single group double switch, scene switch, broadcast switch. -          PC plastic Shell, small size, easy installation. -          No external power supply, simply connected to the DALI bus. -          Low voltage operation, safe and reliable. -          Ordinary reset switch can achieve DALI intelligent control. -          Applicable to home, office, hotel, supermarket etc.

    € 47,94 -15% € 40,75
  • DA3

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 89,90 -15% € 76,42
  • E6-DA1

    - Adopt latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - Easy to set DALI address. - Support group, unicast, broadcast mode.

    € 76,02 -15% € 64,62
  • DA1

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 78,36 -15% € 66,61
  • DA4

    - Latest DALI standard protocol IEC62386. - Support switch and dimming function. - DALI bus supply power. - The DIP switch can set address. - Support scene, group, unicast, broadcast mode.

    € 99,60 -15% € 34,86
  • EDT1

    Product FeaturesAdopt DALI standard protocol IEC62386-102,207,209. Support DT8 type, CT (EDT2) and RGB (EDT3) color control.  Support switch, dimming and color adjustment function, zone control is available. DALI bus supply power. Easy to set address. Support scene, group, unicast and broadcast mode. Touch vibration 

    € 103,57 -50% € 51,79
  • EDT2

    Product FeaturesAdopt DALI standard protocol IEC62386-102,207,209.   Support DT8 type, DIM(EDT1) and RGB(EDT3) color control.  Support switch, dimming and color adjustment function, zone control is available.  DALI bus supply power.  Easy to set address.  Support scene, group, unicast and broadcast mode. Touch vibration 

    € 115,39 -15% € 98,08
  • EDT3

    Product FeaturesAdopt DALI standard protocol IEC62386-102,207,209.   Support DT8 type, CT(EDT2) and DIM(EDT1) control.  Support switch, dimming and color adjustment function, zone control is available.  DALI bus supply power.  Easy to set address.  Support scene, group, unicast and broadcast mode. Touch vibration 

    € 115,39 -15% € 98,08
Toont 1 - 0 van 1 item

CV 0/1-10V Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • LM-75-12-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 89,98 -15% € 76,48
  • LM-75-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 89,98 -15% € 76,48
  • LM-75-12-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 93,93 -15% € 79,84
  • LM-75-24-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 93,93 -15% € 79,84
  • AD-36-12-F1P1

    € 41,05 -15% € 34,89
  • AD-36-24-F1P1

    € 42,50 -15% € 36,13
  • LM-150-12-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM- Dimming range from 0-100%, LED start at 0.1% possible.- With soft-on and fade in function, visual more comfortable.- Automatic recognition of 0-10V, 1-10V input signal.- 0-100% flicker-free, High frequency exemption level. - High efficient driver: efficiency 93%, PF>0.98, THD<6%.- In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W- Innovative thermal management technology, intelligent power life protection.- Over-heat / Over voltage / Over load / Short circuit protection, recover automatically.- Fully-protected plastic housing with design of dismountable end cover.- Suitable for internal lights application for I/II/III- Up to 50000-hour life time.- 5 years warranty (Rubycon capacitor).- Ultra-low consumption of 0-10V ports: < 0.05mA.- Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable

    € 115,15 -15% € 97,88
  • LM-100-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 98,97 -15% € 84,12
  • LM-150-12-G2A2

    € 119,83 -15% € 101,86
  • LM-100-24-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 104,04 -15% € 88,43
  • LM-150-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM- Dimming range from 0-100%, LED start at 0.1% possible.- With soft-on and fade in function, visual more comfortable.- Automatic recognition of 0-10V, 1-10V input signal.- 0-100% flicker-free, High frequency exemption level. - High efficient driver: efficiency 93%, PF>0.98, THD<6%.- In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W- Innovative thermal management technology, intelligent power life protection.- Over-heat / Over voltage / Over load / Short circuit protection, recover automatically.- Fully-protected plastic housing with design of dismountable end cover.- Suitable for internal lights application for I/II/III- Up to 50000-hour life time.- 5 years warranty (Rubycon capacitor).- Ultra-low consumption of 0-10V ports: < 0.05mA.- Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable

    € 115,15 -15% € 97,88
  • LM-150-24-G2A2

    € 119,83 -15% € 101,86
  • AD-75-12-F1M1

    Een Constant Voltage 0-10V driver met Integrated Power Supply. Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 75W, maximaal ampere van 6,25A en komt 12V uit.

    € 85,33 -15% € 29,87
Toont 1 - 0 van 1 item

CC 0/1-10V Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-12-100-400-W1A

    - Dimming interface: 0-10V (1-10V/10VPWM/RX). - T-PWM digital dimming, present a perfect visual experience. Built-in SCM, dimming curve and     smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 31,27 -15% € 26,58
  • SE-12-350-700-W1A

    - Dimming interface: 0-10V (1-10V/10VPWM/RX). - T-PWM digital dimming, present a perfect visual experience. Built-in SCM, dimming curve and     smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 31,27 -15% € 26,58
  • AD-25-150-900-E1A1

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push Dim. - T-PWM digital dimming, present a perfect visual experience. - Built-in SCM, dimming curve and smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multiple current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 62,72 -15% € 53,31
  • AD-15-100-700-E1A1

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push Dim. - T-PWM digital dimming, present a perfect visual experience. - Built-in SCM, dimming curve and smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multiple current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 54,87 -15% € 46,64
  • AD-36-200-1200-E1A1

    € 66,27 -15% € 56,33
  • SE-20-250-1000-W2A2

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push DIM. - T-PWM digital dimming, present a perfect visual experience. - With soft-on and fade in function, visual more comfortable. - Achieve dimming or CT adjustment for 1CH 0-10V or 2CH 0-10V. - Dimming range: 0~100%, LED start at 0.1% possible.  - Automatic recognition of 0-10V, 1-10V input signal. - DIP switch for 16 optional currents' quick selection. - 0-100% flicker-free, High frequency exemption level. - Ultra-low consumption of 0-10V ports: <0.05mA. - In line with the EU energy efficiency ERP directive, standby power consumption <0.5W. - Innovative thermal management technology, intelligent power life protection.  - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically.  - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.  - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor).

    € 55,28 -15% € 46,99
  • LT-702-CC

    LED Dimmer voor stroom gestuurde LED's die je door middel van 0 of 1-10V signaal wilt aansturen. De dimmer kan ingesteld worden op 1400mA, 1750mA of 2100mA. Kan aangesloten worden op een voeding van 12 tot 48 Volt. Ideaal in combinatie met standaard 0-10V dimmers van de bekende merken.

    € 89,89 -15% € 31,46
Toont 1 - 0 van 1 item
  • LT-704-5A

    De 0-10V LED dimmer stelt je in staat om LED verlichting door middel van een 0-10V signaal te dimmen. De controller heeft 4 output kanalen van 5 Ampere en kan maximaal 20 Ampere aan. Kan worden aangesloten op een voeding van 12 tot 24 Volt. Ideaal in combinatie met standaard 0-10V dimmers van de bekende merken.

    € 97,94 -15% € 83,25
  • DIN-711-12A

    De 0-10V LED dimmer stelt je in staat om LED verlichting door middel van een 0-10V signaal te dimmen. De controller heeft één output kanaal van 12 Ampere. Kan worden aangesloten op een voeding van 12 tot 24 Volt. Ideaal in combinatie met standaard 0-10V dimmers van de bekende merken.

    € 97,94 -15% € 83,25
  • LT-701-6A

    De 0-10V LED dimmer stelt je in staat om LED verlichting door middel van een 0-10V signaal te dimmen. De controller heeft één output kanaal van 6 Ampere. Kan worden aangesloten op een voeding van 12 tot 24 Volt. Ideaal in combinatie met standaard 0-10V dimmers van de bekende merken.

    € 61,17 -15% € 51,99
  • LT-701-12A

    De 0-10V LED dimmer stelt je in staat om LED verlichting door middel van een 0-10V signaal te dimmen. De controller heeft één output kanaal van 12 Ampere. Kan worden aangesloten op een voeding van 12 tot 24 Volt. Ideaal in combinatie met standaard 0-10V dimmers van de bekende merken.

    € 77,85 -15% € 66,17
  • LT-393-5A

    SALE!! Op = Op  Deze 0 -10V LED dimmer gaat uit productie! op aanvraag bestellen via info@ltech-led.euDeze LED dimmer is geschikt om SingleColor Flexstrip (constant voltage) aan te sturen middels een 0-10V signaal. De dimmer stuurt PWM signaal uit. De dimmer heeft 3 output kanalen van 5A. Het totaal vermogen ligt op 180W in geval van een 12V FlexStrip, en 360W in het geval van een 24V FlexStrip.

    € 65,00 -15% € 22,75
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item

CV Triac Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • TD-36-24-E1P1

    € 46,97 -15% € 39,92
  • TD-36-12-E1P1

    € 46,97 -15% € 39,92
  • LM-75-12-G1T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT.  - Built-in SCM, dimming curve and smoothing time can be customized.  - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III.

    € 91,35 -15% € 77,65
  • LM-75-12-G2T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - With soft-on and fade in function, visual more comfortable. - 2 independently SELV constant voltage output channels. - Constant power design, adjust brightness and color temperature synchronously - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - High Efficient driver: efficiency 88%,PF>0.98, THD<6%  - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III. - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor)

    € 95,37 -15% € 81,06
  • LM-75-24-G2T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - With soft-on and fade in function, visual more comfortable. - 2 independently SELV constant voltage output channels. - Constant power design, adjust brightness and color temperature synchronously - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - High Efficient driver: efficiency 88%,PF>0.98, THD<6%  - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III. - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor)

    € 95,37 -15% € 81,06
  • LM-75-24-G1T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT.  - Built-in SCM, dimming curve and smoothing time can be customized.  - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III.

    € 91,35 -15% € 77,65
  • TD-150-24-E1M1

    € 100,50 -15% € 85,43
  • TD-150-12-E1M1

    € 100,50 -15% € 85,43
  • TD-10-MR16

    - Dimming interface: Triac/ELV - Apply to leading edge / trailing edge Triac dimmers and dimming system. - Built-in singlechip, dimming curve and smoothing time can be customized. - Dimming range: 0~100%, LED start at Max. 1% possible. - Over load / Over-heat protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 25,20 -15% € 21,42
Toont 1 - 0 van 1 item

CC Triac Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • TD-15-150-700-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ

    € 48,83 -15% € 41,51
  • TD-25-200-900-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ

    € 61,01 -15% € 51,86
  • TD-10-350-700-E1P1

    Een Constant current TRIAC driver met ingebouwde voeding Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 2,1 tot 9,8W, 700mA en spanning range van 10 tot 14VDC.NOTE! Dit product komt in 700mA standaard versie! Is op aanvraag ook verkrijgbaar in 350mA, 400mA, 450mA, 500mA, 550mA, 600mA of 650mA versies. Om aan te vragen stuur een mail naar info@ltech-led.eu or sales@inventdesign.nl   

    € 29,50 -15% € 25,08
  • TD-36-450-1200-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 65,50 -15% € 55,68
  • TD-10-100-400-E1P1

    Een Constant current TRIAC driver met ingebouwde voeding Direct aansluitbaar op 100-240 Volt. Stuurt PWM dimming uit en kan een belasting aan van 3,5 tot 9,8W, 350mA en spanning range van 10 tot 28VDC.NOTE! Dit product komt in 350mA standaard versie! Is op aanvraag ook verkrijgbaar in 100mA, 150mA, 200mA, 250mA, 300mA of 400mA versies. Om aan te vragen stuur een mail naar info@ltech-led.eu or sales@inventdesign.nl

    € 29,50 -15% € 25,08
  • SE-15-150-500-G1T

    - Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings with small size and light weight. - The clamshell design and screwless type for strain-relief, tensile strength of wires complies with the 0.5-1.5mm2wire diameter 60N tensile test, and complies with the tensile test standard GB7000.1- 2015/IEC60598-1:2014. - Soft-on and fade-in dimming function enhances your visual comfort. - T-PWMTM dimming technology allows continuous and flicker-free images under high-speed shooting. - Dimming from 0~100%, down to 0.01%. - 0-100% flicker-free dimming with high frequency exemption level. Innovative thermal management technology protects the power life intelligently. - Multi-current & wide voltage, suitable for different power LEDs. Class 2 LED driver, full protective plastic housing. - Comply with Safety Extra Low Voltage standard. - Overvoltage, overload, short circuit protection and automatic recovery. Suitable for indoor light applications ofI/II/III type. - Up to 50000-hour life time. - 5 year warranty (Rubycon capacitor).

    € 43,30 -15% € 36,81
  • SE-15-350-700-G1T

    - Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings with small size and light weight. - The clamshell design and screwless type for strain-relief, tensile strength of wires complies with the 0.5-1.5mm2wire diameter 60N tensile test, and complies with the tensile test standard GB7000.1- 2015/IEC60598-1:2014. - Soft-on and fade-in dimming function enhances your visual comfort. - T-PWMTM dimming technology allows continuous and flicker-free images under high-speed shooting. - Dimming from 0~100%, down to 0.01%. - 0-100% flicker-free dimming with high frequency exemption level. Innovative thermal management technology protects the power life intelligently. - Multi-current & wide voltage, suitable for different power LEDs. Class 2 LED driver, full protective plastic housing. - Comply with Safety Extra Low Voltage standard. - Overvoltage, overload, short circuit protection and automatic recovery. Suitable for indoor light applications ofI/II/III type. - Up to 50000-hour life time. - 5 year warranty (Rubycon capacitor).

    € 43,30 -15% € 36,81
  • SE-12-100-400-G1T

    - Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings with small size and light weight. - The clamshell design and screwless type for strain-relief, tensile strength of wires complies with the 0.5-1.5mm2wire diameter 60N tensile test, and complies with the tensile test standard GB7000.1- 2015/IEC60598-1:2014. - Soft-on and fade-in dimming function enhances your visual comfort. - T-PWMTM dimming technology allows continuous and flicker-free images under high-speed shooting. - Dimming from 0~100%, down to 0.01%. - 0-100% flicker-free dimming with high frequency exemption level. Innovative thermal management technology protects the power life intelligently. - Multi-current & wide voltage, suitable for different power LEDs. Class 2 LED driver, full protective plastic housing. - Comply with Safety Extra Low Voltage standard. - Overvoltage, overload, short circuit protection and automatic recovery. Suitable for indoor light applications ofI/II/III type. - Up to 50000-hour life time. - 5 year warranty (Rubycon capacitor).

    € 33,14 -15% € 28,17
  • SE-9-350-700-G1T

    - Adopt SAMSUNG/COVESTRO V0 flame resistant polycarbonate protective housings with small size and light weight. - The clamshell design and screwless type for strain-relief, tensile strength of wires complies with the 0.5-1.5mm2wire diameter 60N tensile test, and complies with the tensile test standard GB7000.1- 2015/IEC60598-1:2014. - Soft-on and fade-in dimming function enhances your visual comfort. - T-PWMTM dimming technology allows continuous and flicker-free images under high-speed shooting. - Dimming from 0~100%, down to 0.01%. - 0-100% flicker-free dimming with high frequency exemption level. Innovative thermal management technology protects the power life intelligently. - Multi-current & wide voltage, suitable for different power LEDs. Class 2 LED driver, full protective plastic housing. - Comply with Safety Extra Low Voltage standard. - Overvoltage, overload, short circuit protection and automatic recovery. Suitable for indoor light applications ofI/II/III type. - Up to 50000-hour life time. - 5 year warranty (Rubycon capacitor).

    € 36,46 -15% € 30,99
Toont 1 - 0 van 1 item
  • EBOX-TD

    EBOX-TD wireless module applies L-BUS wireless communication protocol and converts it into trailing edge dimming signal through RF wireless communication technology, which is used together with LTECH Triac LED driver and compatible with all Triac series products in the market. Rely on L-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it more easier for new or retrofit installations.

    € 63,92 -15% € 54,33
  • E6-TD1

    € 38,33 -15% € 32,58
Toont 1 - 0 van 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

  • WiFi-106

    L-BUS is a WiFi lighting control system, consisted of APPs and WiFi controller. Controls various types of LED lighting products by installing the related App on our Android or iOS mobile devices which support WiFi connection. With DIM, CT adjustment, RGB and RGBW changing 4 in 1 operation, plus 12 zones control function, you can connect directly or by a router.

    € 258,60 -15% € 219,81
  • WiFi-108

    - Realize global long-range control by cloud platform. - 2 in 1 control: Wireless RF and wired connection. - Multi-zones dimming, color changing and multi-groups control. - One click scene function, timing function. - Advanced lighting program setting, sunrise or sunset effect or any other changing effect could be simulated - Support mobile phone, remote control and dimming panel to control all lighting effects. - Voice control, support amazon ECHO and TmallGenie smart speaker. - Opened third party communication interface: Trigger contacts.

    € 345,00 -15% € 293,25
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
  • E1

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 58,91 -15% € 50,07
  • E1S

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 62,95 -15% € 53,51
  • E2

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 67,57 -15% € 57,43
  • E3

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 71,61 -15% € 60,87
  • E3S

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 83,16 -15% € 70,69
  • E4

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Save any scene you like, touch 1 key to recall scene, easy and convenient. - Adopts capacitive touch control technology on the full color slider, makes LED color selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 86,50 -15% € 73,53
  • E4S

    With this wall control panel you can control RGB light directly from the PWM output at the back of the panel or via RF using a separate available RF receiver. By touching the mode icon you can switch between various presets like gradient color change or even more exciting effects.  2 in 1 function: RF wireless control and PWM power output. Power output, lamps can be connected directly, easy and convenient. Touch keys with chord and LED indicator. Adopts capacitive touch control technology on the full color panel, makes LED color selection more user-friendly. Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 88,00 -15% € 74,80
  • E5S

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - RGB, RGBW, RGB+CT LED lights can be controlled. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color panel, makes LED color selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 94,90 -15% € 80,67
Toont 1 - 0 van 1 item
  • EBOX-AD

    EBOX-AD wireless module applies to L-BUS wireless communication protocol and converts into 0-10V signal through RF wireless communication technology, which is used with LTECH 0-10V LED driver and compatible with all 0-10V series products on the market. Relying on L-BUS wireless technology, removing complex layout and expensive technical cost, making new or retrofit projects installation easier.

    € 63,92 -15% € 54,33
  • EBOX-TD

    EBOX-TD wireless module applies L-BUS wireless communication protocol and converts it into trailing edge dimming signal through RF wireless communication technology, which is used together with LTECH Triac LED driver and compatible with all Triac series products in the market. Rely on L-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it more easier for new or retrofit installations.

    € 63,92 -15% € 54,33
  • EBOX-AP

    EBOX-AP wireless repeater applies LT-BUS wireless communication protocol for wireless signal extension, it is not necessary to pair via its factory default setting, greatly ensures its stability and wide controlling area among LT-BUS wireless communication devices, removing the complex cabling procedure, to make it become more easier for new or retrofit installations.

    € 70,03 -15% € 59,53
  • EBOX-DMX-PRO

    EBOX-DMX wireless module applies LT-BUS wireless communication protocol and converts it to DMX512 through RF wireless communication technology, which is used with the LTECH DMX512 LED driver and compatible with all DMX products on the market. Rely on LT-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it become more easier for new or retrofit installations.

    € 84,55 -15% € 71,87
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

  • WiFi-104

    De LED Controller WiFi-104 is vernieuwd! Single Color en MultiColor (RGB en RGBW) LED verlichting is nu heel eenvoudig te bedienen doormiddel van de bijbehorende gratis app. 12 zones zijn afzonderlijk van elkaar te bedienen. Ook zijn verschillende presets in te stellen met al je favoriete kleuren en intensiteit. De app draait op iPhone, iPad en Android-apparaten. De LED Controller WiFi-104 is verbeterd omdat er een eigen netwerk kan worden aangemaakt, maar ook verbonden kan worden met bestaande WiFi netwerken. Download de gratis app en ontdek de diverse mogelijkheden! Apple Store Google Play Store

    € 186,00 -15% € 158,10
Toont 1 - 0 van 1 item
  • UX5

    The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.

    € 130,66 -15% € 45,73
  • UX8

    The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.

    € 152,15 -15% € 129,33
  • DX7

    Met de DX7 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 86,36 -15% € 30,23
  • DX6

    Met de DX6 LED Dimmer kun je gemakkelijk en simpel je LED verlichting bedienen via het touch paneel. Werkt op 110-240V, maakt gebruik van DMX en RF voor aansturing van meerdere zones. Werkt met de R4-5A en de R4-CC ontvanger.

    € 86,36 -15% € 30,23
  • UX1

    The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.

    € 102,93 -15% € 36,03
  • UX2

    The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.

    € 116,56 -15% € 40,80
Toont 1 - 0 van 1 item
Toont 1 - 0 van 1 item
  • R4-5A

    De LED Receiver R4-5A kunt u gebruiken in combinatie met de Wifi 104, DX-serie, D-serie en V-serie controllers en remotes. Hij heeft 4 uitgangen en kan tot 50 meter vanaf de WiFi-104 worden geplaatst in open omgeving en 30 meter vanaf de DX-serie, D-serie en V-serie. Houd wel rekening met muren en andere obstakels, daardoor wordt het bereik minder.

    € 86,36 -15% € 73,41
  • R4-CC

    De LED Receiver R4-CC kunt u gebruiken in combinatie met de Wifi 104, DX-serie, D-serie en V-serie controllers en remotes. Hij heeft 4 Constant Current uitgangen 350mA/700mA/1050mA en kan tot 50 meter vanaf de WiFi-104 worden geplaatst in open omgeving en 30 meter vanaf de DX-serie, D-serie en V-serie. Houd wel rekening met muren en andere obstakels, daardoor wordt het bereik minder.

    € 86,36 -15% € 73,41
Toont 1 - 0 van 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

Toont 1 - 0 van 1 item