LED power amplifier is suitable for all of our single color & RGB controllers to expand power output, it supports PWM control and can connect one to three times more LEDs by adding one more power amplifier, and unlimited power amplifiers can be connected together theoretically.
The constant voltage power amplifier and constant current power amplifiers can be connected together, which is convenient for controlling LEDs with different voltage and power.
Signal input and output of LED power amplifier have security protection function with photoelectricity isolation of 5KV.
Our pixel controller almost able to control all IC-driven LED lights. Compact and powerful, various built-in changing effects and customized scene modes can bring you fantastic color!
By RF remote control, you can select from a variety of dynamic lighting effects, set controlled pixels quantity, adjust the changing speed and brightness, change the lighting moving direction, adjust RGB sequence, select the IC type, store and play customized scene etc.
SPI-16S
The Mini-16 SPI controller is able to drive a large number of different DiGi LED strips. With the supplied remote you can select one of the 16 pre programmed effects.
LT-484S
LED Signal Converter Dali. Converts Dali signals to 4 channels 0-10 V X4 (default). It is optional to order a 0/5V PWM or 0/10V PWM model.
LT-844
A LED Signal converter. Converts a DMX/DMX512 signal to a 0-10V signal. This article is also available on request in: - DMX to 5V PWM - DMX to 10V PWM
D1
The D1 LED Controller for Single Color LED products and has 3 x 4A outputs up to 12A. The brightness can be determined by means of the Touch Circle or the arrow keys left and right. It can be left under the 30 second fade to on and off, for the in-and turn off the lights. Among the key directly below a preset can be stored.
LT-870S
With this DMX transceiver you can receive or send DMX, it works in the 2.4GHz frequency and there is a possibility to choose between 63 different channels. (operating between 2.401Hz and 2.464hz) Our recommended maximum distance is between the 15/20 meter, +/-30 meters is factory tested in an open environment without blocking signals.
D4
The D4 LED Controller is designed for RGBW LED products and has 4 x 4A outputs up to 16A. The color can be choosed by the Touch Circle. The speed ââ¬â¹Ã¢â¬â¹and brightness can be determined by the arrow keys left and right. For white choose the touch key below right.
D2
The D2 LED Controller is suitable for Adjustable white LED strip or a combination of wam white and neutral white LED strip. It has 2 outputs of each 4A for a total 8A. The brightness can be set with the touch circle or the arrow keys left and right. In the left bottom corner you can choose for if you want the 2 colours to fade over or if you would like to adjust them seperetly, in the bottom right corner is a preset button so you can save your setup.
UX8
The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.
UX1
The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.
UX2
The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.
UX5
The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.
EX3S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.
EX4S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.
WiFi-RDM01
WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.
EX8S
- Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Compatible with remote and APP control. - No limit the quantity of drivers in each zone, and all color modes keep synchronously
EX61
- Adopt RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Wireless within effective range, any quantity of receivers can be connected and maintain synchronous effect. - With the function of dimming and switching. - The panel can be controlled by remote, or by mobile phone if add a gateway.
EX7S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - No limit the quantity of drivers in each zone, and all color modes keep synchronously. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Compatible with remote and APP control.
LT-8030
This 3x4A DMX controller is suitable for smaller LED installations in which the required output capacity is limited.
LT-880
The 24-channel DMX decoder is suitable for applications where multiple RGB or SingleColor must be controlled as individual zones with a DMX signal. In case you are using RGB FlexStrip a maximum of 8 zones can be addressed separately. With the SingleColor this will be 24 zones.
LT-840-6A
The 4-channel DMX controller is ideal for controlling RGB-WW FlexStrip by means of DMX. Also, it is suitable for SingleColor, RGB and RGBW FlexStrips.
LT-830-8A
This 3x8A DMX controller is suitable for RGB LED installations, but it can also be used in combination with SingleColor FlexStrip.
LT-898
This 8x6A DMX controller has 8 channels, and maximum load of 6 amps per channel. So you can individually control 8 LED systems individually from each other. You can easily use the dip switches with the binary numbers to set your DMX address, and you can choose from 3P XLR DMX-in or DMX over Ethernet to use with this controller.
LT-820-5A
This DMX LED controller is suitable to controll constant voltage LED, rated from 5 to 24 Volts. The controller is capable of 16 or 8 bit dimming and has a handy digital screen where you can easily set and read the DMX start address.
DIN-DMX-4CH
This DIN rail DMX controller has 4 outputs of each 4A and can be easily mounted on a DIN rail. The 4-channel controller is perfect to control RGBW strip through DMX. And it is easy to address trough the display.
LT-484S
LED Signal Converter Dali. Converts Dali signals to 4 channels 0-10 V X4 (default). It is optional to order a 0/5V PWM or 0/10V PWM model.
LT-844
A LED Signal converter. Converts a DMX/DMX512 signal to a 0-10V signal. This article is also available on request in: - DMX to 5V PWM - DMX to 10V PWM
D1
The D1 LED Controller for Single Color LED products and has 3 x 4A outputs up to 12A. The brightness can be determined by means of the Touch Circle or the arrow keys left and right. It can be left under the 30 second fade to on and off, for the in-and turn off the lights. Among the key directly below a preset can be stored.
LT-870S
With this DMX transceiver you can receive or send DMX, it works in the 2.4GHz frequency and there is a possibility to choose between 63 different channels. (operating between 2.401Hz and 2.464hz) Our recommended maximum distance is between the 15/20 meter, +/-30 meters is factory tested in an open environment without blocking signals.
D4
The D4 LED Controller is designed for RGBW LED products and has 4 x 4A outputs up to 16A. The color can be choosed by the Touch Circle. The speed ââ¬â¹Ã¢â¬â¹and brightness can be determined by the arrow keys left and right. For white choose the touch key below right.
D2
The D2 LED Controller is suitable for Adjustable white LED strip or a combination of wam white and neutral white LED strip. It has 2 outputs of each 4A for a total 8A. The brightness can be set with the touch circle or the arrow keys left and right. In the left bottom corner you can choose for if you want the 2 colours to fade over or if you would like to adjust them seperetly, in the bottom right corner is a preset button so you can save your setup.
UX8
The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.
UX1
The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.
UX2
The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.
UX5
The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.
EX3S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.
EX4S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.
WiFi-RDM01
WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.
EX8S
- Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Compatible with remote and APP control. - No limit the quantity of drivers in each zone, and all color modes keep synchronously
EX61
- Adopt RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Wireless within effective range, any quantity of receivers can be connected and maintain synchronous effect. - With the function of dimming and switching. - The panel can be controlled by remote, or by mobile phone if add a gateway.
EX7S
- Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - No limit the quantity of drivers in each zone, and all color modes keep synchronously. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Compatible with remote and APP control.
LT-8030
This 3x4A DMX controller is suitable for smaller LED installations in which the required output capacity is limited.
LT-880
The 24-channel DMX decoder is suitable for applications where multiple RGB or SingleColor must be controlled as individual zones with a DMX signal. In case you are using RGB FlexStrip a maximum of 8 zones can be addressed separately. With the SingleColor this will be 24 zones.
LT-840-6A
The 4-channel DMX controller is ideal for controlling RGB-WW FlexStrip by means of DMX. Also, it is suitable for SingleColor, RGB and RGBW FlexStrips.
LT-830-8A
This 3x8A DMX controller is suitable for RGB LED installations, but it can also be used in combination with SingleColor FlexStrip.
LT-898
This 8x6A DMX controller has 8 channels, and maximum load of 6 amps per channel. So you can individually control 8 LED systems individually from each other. You can easily use the dip switches with the binary numbers to set your DMX address, and you can choose from 3P XLR DMX-in or DMX over Ethernet to use with this controller.
LT-820-5A
This DMX LED controller is suitable to controll constant voltage LED, rated from 5 to 24 Volts. The controller is capable of 16 or 8 bit dimming and has a handy digital screen where you can easily set and read the DMX start address.
DIN-DMX-4CH
This DIN rail DMX controller has 4 outputs of each 4A and can be easily mounted on a DIN rail. The 4-channel controller is perfect to control RGBW strip through DMX. And it is easy to address trough the display.
Sale items - up to 65% off
LT-3800-6A
The LED Manager 3x6A is suitable for controlling RGB LED strip. The driver is equiped with multiple pre fixed color loops. It is possible to save the intensity and speed in a preset.
LT-3090-350
This Power Repeater is suitable to use with 350mA high power LED's.
LT-3090-700
This Power Repeater is suitable to use with 700mA high power LED's.
LT-830-700
The 700mA DMX decoder is suitable to control 700mA High Power LED's. A maximum of 12 pieces high power LED's can be connected to one 700mA DMX controller.
T3-5A
This receiver works with Radio Frequency and can be used with LED Remote RF Touch 3 (item 22552), LED Remote RF Touch 3M (item 22553) and LED Remote RF Touch 3X (item 22557). The receiver has touch buttons which enables you to control the strips through the receiver as well.
T3M
This remote works with Radio Frequency. It differs from the LED Remote RF Touch 3 (item 22552) because this one is capable of controlling up to 10 LED strips apart from each other. You will need 10 receiver units (item 22554). The remote has a 30 meter reach and is chargeable with USB. The controller has 32 built in color programmes like strobes and color loops. With the touch color wheel a color is easily picked. To use this product you will need a receiver (item 22554 LED Receiver RF 3x5A).
D1
The D1 LED Controller for Single Color LED products and has 3 x 4A outputs up to 12A. The brightness can be determined by means of the Touch Circle or the arrow keys left and right. It can be left under the 30 second fade to on and off, for the in-and turn off the lights. Among the key directly below a preset can be stored.
LT-840-700
This controller can be used for driving constant current high power LED's using DMX signal. The controller has 4 output channels and enables you to mix RGB and white very smooth.
LT-DMX-8806
This DMX-to-DiGi controller is capable of driving digital LED strip with the following IC's: LPD8803 and LPD8806. The controller has a greyscale level of 256 which guarantees smooth color mixing.
LT-DMX-3001
This DMX-to-DiGi controller is capable of driving digital LED strip with the following IC's: LPD8803 and LPD8806. The controller has a greyscale level of 256 which guarantees smooth color mixing.
LT-DMX-9813
This DMX-to-DiGi controller is capable of driving digital LED strip with the following IC: P9813. The controller has a greyscale level of 256 which guarantees smooth color mixing.
LT-3063-3A
This IP67 protected Power Repeater, when combined with a power supply, allows you to amplify and connect LED strips in longer lengths. This repeater can be charged with 3x3A.
LT-701-CC
LED Dimming controller for constant current release that can be controlled through a 0 or 1-10V signal. A maximum of 12 power LED's can be controlled via this controller.
T2M
This Dimmer remote is suitable to dim a LED strip with 2 colors LED or 2 SingleColor FlexStrips. The remote can be used with multiple receivers and it is, in contrary to the LED Dimmer Remote 2 Ch. RF Touch, possible to control them as individual zones. The remote transmits a Radio Frequency signal and has a 30 meter range. The LED can be easily dimmed with the touch remote. The remote is chargeable by means of a USB cable. To use this product you will need the receiver (LED RGB Receiver RF item 22651).
T3X
This remote works with Radio Frequency. Other than the built in colour programmes it is possible with this controller to make your own color programmes! This remote is not capable of controlling multiple LED strips individually. This controller is capable of changing the colormode of one or multiple LED strips at the same time. Optionally with multiple receivers which can be synced wireless. The controller has 32 built in color programmes like strobes and color loops. With the touch color wheel a color is easily picked. To use this product you will need a receiver (item 22554 LED Receiver RF 3x5A).
LT-702-CC
LED Dimmer for power driven LEDs that you want to control using 0 or 1-10V signal. The dimmer can be set to 1400mA, 1750mA or 2100mA.
LT-3050
This Power Repeater Wireless Transmitter allows you to amplify the LED signal wireless. In combination with a PSU the LED strip can be further extended. The transmitter can send 3xPWM.
LT-898
This 8x6A DMX controller has 8 channels, and maximum load of 6 amps per channel. So you can individually control 8 LED systems individually from each other. You can easily use the dip switches with the binary numbers to set your DMX address, and you can choose from 3P XLR DMX-in or DMX over Ethernet to use with this controller.
D2
The D2 LED Controller is suitable for Adjustable white LED strip or a combination of wam white and neutral white LED strip. It has 2 outputs of each 4A for a total 8A. The brightness can be set with the touch circle or the arrow keys left and right. In the left bottom corner you can choose for if you want the 2 colours to fade over or if you would like to adjust them seperetly, in the bottom right corner is a preset button so you can save your setup.
T4-CC
This receiver works with radio frequency 2.4GHz and is compatible with the LED RF Remote Touch 4 (item 22562).
LT-393-5A
SALE!! This 0-10V LED controller is going out of production order upon request via: info@ltech-led.eu
Our wide range of LED power supplies contains a solution for all 5V, 12V and 24V LED lighting. All power supplies have been extensively tested for use in combination with LED lighting.
XLG-75-24
Stable IP67 75W LED power supply for 24V applications.
SDR-960-24
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
SDR-240-24
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
SDR-480P-24
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
SDR-240-48
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
SDR-480P-48
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
SDR-960-48
Quiet and efficient power supply. This power supply uses a passive cooling and can be installed on a DIN rail easily.
HLG-480-24
Stable IP67 480W LED power supply for 48V applications.
RSP-320-5
Stable 300W LED power supply for 5V applications.
RSP-200-24
This power supply has an output of 24V DC and 10A providing 240W output. This model has an active cooling with a fan.
RSP-500-24
Stable 500W LED power supply for 24V applications.
LPV-20-24
Stable IP67 20W LED power supply for 24V applications.
LPV-35-5
Stable IP67 30W LED power supply for 5V applications.
LPV-35-12
Stable IP67 36W LED power supply for 12V applications.
LPV-35-24
Stable IP67 36W LED power supply for 24V applications.
RCP-2000 Series
The power supplies of the Meanwell RCP-2000 series can be used for the RKP-1U Rack System. Max. 3 power supplies per rack.
XLG-100-12
Stable IP67 100W LED power supply for 12V applications.
XLG-100-24
Stable IP67 100W LED power supply for 24V applications.
HLG-150H-24
Stable IP67 151W LED power supply for 24V applications.
HLG-240-12
Stable IP67 192W LED power supply for 12V applications.
HLG-320H-12A
Stable IP67 264W LED power supply for 12V applications.
HLG-320H-24
Stable IP67 320W LED power supply for 24V applications.
HLG-320-48
Stable IP67 320W LED power supply for 24V applications.
HLG-600H-24
Stable IP65 600W LED power supply for 24V applications.
HLG-150H-48
Stable IP67 150W LED power supply for 48V applications.
HLG-240H-48
Stable IP67 320W LED power supply for 48V applications.
HLG-240-24
Stable IP67 240W LED power supply for 24V applications.
RCP-1600 Series
The power supplies of the Meanwell RCP-1600 series can be used for the RHP-1U Rack System. Max. 5 power supplies per rack.
RHP-1U Rack System
Meanwell RHP-1U Rack System.
LPV-20-12
Stable IP67 20W LED power supply for 12V applications.
HLG-150H-12
Stable IP67 150W LED power supply for 12V applications.
LPV-100-12
Stable IP67 100W LED power supply for 12V applications.
LPV-60-12
Stable IP67 60W LED power supply for 12V applications.
LPV-60-24
Stable IP67 60W LED power supply for 24V applications.