Series 

Our LED controllers have been carefully selected to be able to offer a suitable solution for every possible LED project. We supply controller and drivers for DMX, DALI, 0-10V, Triac and more, designed for professional lighting.

Subcategories

DMX512 Master controller

DMX512 Master controller is the output signal of international standard DMX512/1990. It not only can control all the LED lights that receiving the standard DMX signal in the market, but also can work with our DMX decoder to control the general LED lights without DMX512.

  • WiFi-RDM01

    WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.

    € 153,54 -15% € 130,51
  • EX3S

    - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. -  Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.

    € 88,36 -15% € 75,11
  • EX4S

    - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Install touch panel at different areas, can control the same LED light, achieve multi-panel control, no quantity limited. -  Touch keys with chord and LED indicator. - Adopts capacitive touch control technology makes LED dimming selection more user-friendly. - Compatible with remote and APP control.

    € 99,75 -15% € 84,79
  • EX7S

    - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - No limit the quantity of drivers in each zone, and all color modes keep synchronously. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Compatible with remote and APP control.

    € 107,07 -15% € 91,01
  • EX8S

    - Adopts capacitive touch control technology on the full color wheel, make LED color selection more user-friendly. - Adopt wireless RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers. - Four zones can be combined arbitrarily, for example: zone 1 and zone 2 as a group, or zone 1, zone 3, zone 4 as a group, or all the 4 zones as a group. - Support multiply panels linkage control, no quantity limitation. - Touch keys with chord and LED indicator. - Compatible with remote and APP control. - No limit the quantity of drivers in each zone, and all color modes keep synchronously

    € 114,98 -15% € 97,73
  • UX5

    The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.

    € 130,66 -15% € 45,73
  • UX8

    The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.

    € 152,15 -15% € 129,33
  • LT-870S

    With this DMX transceiver you can receive or send DMX, it works in the 2.4GHz frequency and there is a possibility to choose between 63 different channels. (operating between 2.401Hz and 2.464hz) Our recommended maximum distance is between the 15/20 meter, +/-30 meters is factory tested in an open environment without blocking signals.

    € 127,00 -15% € 107,95
  • UX1

    The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.

    € 102,93 -15% € 36,03
  • UX2

    The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.

    € 116,56 -15% € 40,80
  • D1

    The D1 LED Controller for Single Color LED products and has 3 x 4A outputs up to 12A. The brightness can be determined by means of the Touch Circle or the arrow keys left and right. It can be left under the 30 second fade to on and off, for the in-and turn off the lights. Among the key directly below a preset can be stored.

    € 64,78 -15% € 22,67
  • D2

    The D2 LED Controller is suitable for Adjustable white LED strip or a combination of wam white and neutral white LED strip. It has 2 outputs of each 4A for a total 8A. The brightness can be set with the touch circle or the arrow keys left and right. In the left bottom corner you can choose for if you want the 2 colours to fade over or if you would like to adjust them seperetly, in the bottom right corner is a preset button so you can save your setup.

    € 71,44 -15% € 25,00
  • D4

    The D4 LED Controller is designed for RGBW LED products and has 4 x 4A outputs up to 16A. The color can be choosed by the Touch Circle. The speed ââ¬â¹Ã¢â¬â¹and brightness can be determined by the arrow keys left and right. For white choose the touch key below right.

    € 86,36 -15% € 30,23
  • EX61

    - Adopt RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation. - Wireless within effective range, any quantity of receivers can be connected and maintain synchronous effect. - With the function of dimming and switching. - The panel can be controlled by remote, or by mobile phone if add a gateway.

    € 75,92 -15% € 64,53
Showing 1 - 0 of 1 item

CV DMX512 Decoder

DMX Decoder adopted the advanced micro-electronic control technology to convert universal DMX512/1990 digital signal to CC/CV PWM signal to drive LED, which controlled by DMX512 console, realize 0-100% brightness or various changing effect. And can control single color, dupi-color, RGB, RGBY, RGBW, RGBA LED lights.

  • LT-924-OLED

    The 24-channel OLED DMX decoder is suitable for applications where multiple DIM, CT or RGB must be controlled  with a DMX signal. In case you are using RGB FlexStrip a maximum of 8 modules can be connected. It has 24 channels of 3A (72A max) and a maximum power of 1728W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: RJ45, Green terminal, XLR-3 and XLR-5. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve. 

    € 313,21 -15% € 266,23
  • LT-820-5A

    This DMX LED controller is suitable to controll constant voltage LED, rated from 5 to 24 Volts. The controller is capable of 16 or 8 bit dimming and has a handy digital screen where you can easily set and read the DMX start address. 

    € 125,12 -15% € 106,35
  • LT-811-12A

    DMX controller with 1 output 12A PWM. The controller has a digital display which depicts the DMX starting address. The starting address can easily be set. This DMX controller is also capable of sending out a 0-10V dimming signal.

    € 95,77 -15% € 81,40
  • LT-840-6A

    The 4-channel DMX controller is ideal for controlling RGB-WW FlexStrip by means of DMX. Also, it is suitable for SingleColor, RGB and RGBW FlexStrips.

    € 117,94 -15% € 100,25
  • LT-880

    The 24-channel DMX decoder is suitable for applications where multiple RGB or SingleColor must be controlled as individual zones with a DMX signal. In case you are using RGB FlexStrip a maximum of 8 zones can be addressed separately. With the SingleColor this will be 24 zones.

    € 296,00 -15% € 251,60
  • LT-905-OLED

    The 5-channel  OLED DMX decoder is suitable for applications where DIM, CT, RGB, RGBW and RGBWY modules must be controlled with a DMX signal. In case you are using RGBW FlexStrip a maximum of 1 module can be connected. With the Dimming this will be 5 modules. It has 5 channels of 5A (25A max) and a maximum power of 600W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: RJ45 and XLR-5. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve. 

    € 105,10 -15% € 89,34
  • LT-995-OLED

    The 5-channel  OLED DMX decoder is suitable for applications where DIM, CT, RGB, RGBW and RGBWY modules must be controlled with a DMX signal. In case you are using RGBW FlexStrip a maximum of 1 module can be connected. With the Dimming this will be 5 modules. It has 5 channels of 6A (30A max) and a maximum power of 720W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: Green terminal, RJ45 and XLR-3. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve. 

    € 109,79 -15% € 93,32
  • LT-912-OLED

    The 12-channel OLED DMX decoder is suitable for applications where multiple DIM, CT or RGB must be controlled  with a DMX signal. In case you are using RGB FlexStrip a maximum of 4 modules can be connected. It has 12 channels of 4A (48A max) and a maximum power of 1152W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: RJ45, Green terminal and XLR-5. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve. 

    € 186,87 -15% € 158,84
  • LT-932-OLED

    The 32-channel  OLED DMX decoder is suitable for applications where multiple DIM, CT, RGB or RGBW must be controlled with a DMX signal. In case you are using RGBW Strip a maximum of 8 modules can be connected. With the Dimming mode this will be 32. It has 32 channels of 3A (96A max) and a maximum power of 2304W. Works with 12 and 24 Volt DC LED modules. Has multiple DMX sockets to chose from: RJ45, Green terminal and XLR-3 and XLR-5. Also supports 8 & 16 bit functions and has 0.1 - 9,9 dimming curve.

    € 317,68 -15% € 270,03
  • DIN-DMX-4CH

    This DIN rail DMX controller has 4 outputs of each 4A and can be easily mounted on a DIN rail. The 4-channel controller is perfect to control RGBW strip through DMX. And it is easy to address trough the display.

    € 110,95 -15% € 94,31
  • LT-8030

    This 3x4A DMX controller is suitable for smaller LED installations in which the required output capacity is limited.

    € 78,36 -15% € 27,43
  • LT-898

    This 8x6A DMX controller has 8 channels, and maximum load of 6 amps per channel. So you can individually control 8 LED systems individually from each other. You can easily use the dip switches with the binary numbers to set your DMX address, and you can choose from 3P XLR DMX-in or DMX over Ethernet to use with this controller.

    € 176,70 -15% € 61,85
  • LT-830-8A

    This 3x8A DMX controller is suitable for RGB LED installations, but it can also be used in combination with SingleColor FlexStrip.

    € 97,94 -15% € 83,25
  • LT-916-OLED

    - Designed for Hi-power multiple channels application, 16 channels output, and Max. 3A current per channel, up to 1152W output power. - Easy operation with OLED screen and touch buttons. - 4 kinds of mode optional: single color, color temperature, RGB, RGBW. - Support 3 kinds of DMX ports with signal isolation function: 5-pin XLR, RJ45 and green terminal (with signal amplifier function). - With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting, equipment recognition, etc. - With photoelectric isolation function. - With short circuit protection and over current protection, as well as warning function when fault. - With fast self-testing function. - 16bit (65536 levels) / 8bit (256 levels) grey level optional. - Multiple dimming curve (0.1~9.9) optional.

    € 266,18 -15% € 226,25
Showing 1 - 0 of 1 item

CC DMX512 Decoder

DMX Decoder adopted the advanced micro-electronic control technology to convert universal DMX512/1990 digital signal to CC/CV PWM signal to drive LED, which controlled by DMX512 console, realize 0-100% brightness or various changing effect. And can control single color, dupi-color, RGB, RGBY, RGBW, RGBA LED lights.

Showing 1 - 0 of 1 item

DMX-SPI signal type

DMX-SPI signal decoder is to convert the DMX512 digital signal into SPI(TTL) digital signal. It can work on the DMX console to control the LED lights with compatible driving ICs. DMX console can control every channel of the LED Lights, realizing 0-100% dimming and various changing effect.

Our DMX decoder can control LED lights based on following driving ICs: MBI6120, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, TLS3001, TLS3002, WS2801, WS2803, WS2811, WS2812, P9813 IC etc.

The grey scales of DMX decoder depends on the driving IC, the above driving ICs are with a built-in grey scale processor and occupy 70-80% of LED digital lighting market, use our DMX-SPI decoder can simply turn normal LED digital light to DMX512 LED light with international standard communication protocol, which is easy to promote in the international market.

DMX-SPI decoders are widely used in the LED string light, LED dot light, SMD flexible strip, LED digital tube, wall light, pixel screen, high power spot light, wall washer and kinds of LED digital lights.

Showing 1 - 0 of 1 item

CV DMX512 Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- Standard logarithmic dimming curve, the human eye visual feel more comfortable
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature /Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

Showing 1 - 0 of 1 item

CC DMX512 Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
-PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- Standard logarithmic dimming curve, the human eye visual feel more comfortable
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>85%, THD(Total Harmonic Distortion)<10%
- Wide rang voltage+optional arbitrary current, workable with led lights at different power
- Short circuit / Over-temperature /Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply,full protective plastic housing
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-20-250-1000-W2M2

    - Dimming interface: DMX512/RDM, Push Dim - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - With soft-on and fade in function, visual more comfortable. - DIP switch for 16 optional currents' quick selection. - 0-100% flicker-free,High frequency exemption level. - Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable. - In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W Innovative thermal management technology, intelligent power life protection. - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ. - 5 years warranty (Rubycon capacitor).

    € 76,55 -15% € 65,07
  • SE-12-350-700-W1M

    - Dimming interface: DMX512/RDM - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 35,75 -15% € 30,39
  • SE-12-100-400-W1M

    - Dimming interface: DMX512/RDM - T-PWM digital dimming, present a perfect visual experience. - With RDM remote device management protocol. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 35,75 -15% € 30,39
  • DMX-10-350-700-F1P1

    A Constant current DMX driver with built-in power supply. Directly connectable at 100-240 volts. Sends out PWM dimming and has a power load from 2.1 to 9.8W, 700mA current and a voltage range of 3 to 14VDC.NOTE! This product comes in 700mA!! Is also available on request in 350mA, 400mA, 450mA, 500mA, 550mA, 600mA or 650mA versions. To request, send an email to info@ltech-led.eu or sales@inventdesign.nl

    € 31,02 -15% € 10,86
  • DMX-10-100-400-F1P1

    A Constant current DMX driver with built-in power supply. Directly connectable at 100-240 volts. Sends out PWM dimming and has a power load from 3.5 to 9.8W, 350mA current and a voltage range of 10 to 28VDC.NOTE! This product comes in 350mA!!Is also available on request in 100mA, 150mA, 200mA, 250mA, 300mA or 400mA versions. To request, send an email to info@ltech-led.eu or sales@inventdesign.nl

    € 31,02 -15% € 10,86
  • DMX-25-150-900-E1A1

    € 86,36 -15% € 73,41
  • DMX-15-100-700-E1A1

    - Dimming interface: DMX512/RDM, Push Dim. - With RDM remote device management protocol. - PWM digital dimming, no alter LED color rendering index. - Dimming range: 0~100%, LED start at 0.1% possible. - Multi-current & wide voltage, suitable for different power LED. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 74,94 -15% € 63,70
  • DMX-36-200-1200-E1A1

    € 92,59 -15% € 78,70
Showing 1 - 0 of 1 item

DMX Signal amplifier

DMX Signal Amplifier is dedicated to amplify, distribute, and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512.

- It’s specially designed for signal shaping amplification for DMX512 signal which attenuated after a long-distance transmission, realize extending the signal transmission distance.
- Need to use the multiple signals expansion output control, increase DMX l signal amplifier to distribute multi-channel control.
- 1 channel input, 2-3 channels distributed output, there is a independently photoelectricity insulation of >3KV between Input and output terminals, and output terminals among 3 channels, so as to avoid the expensive equipment such as light, DMX driver, precise digital lighting controller, being burnt by the possible high voltage which caused from the wrong wire connection and a broken equipment, also can avoid the signal interference between each DMX equipment, to assure it works safely.

Showing 1 - 0 of 1 item
  • WiFi-RDM01

    WiFi-RDM01 is the RDM master control, which browsing and setting corresponding parameters of the equipment with RDM protocol through the RDM standard protocol. WiFi-RDM01 uses the WiFi module, which can wireless control by the phone's APP and support to upgrade the firmware remotely. which is convenient for customers' using the most functional and latest firmware version. WiFi-RDM01 can be compatible with other brand's product with RDM protocol, and it does not affect the normal operation of other products when hangs on the bus.

    € 153,54 -15% € 130,51
Showing 1 - 0 of 1 item
  • ARTNET-DMX-1

    ArtNet-DMX converter is the Ethernet Control System based on the ArtNet protocol, used to convert the Artnet network date package into DMX512 date, adopting high-speed ARM processor, stable and reliable working. Following Art-net standard protocol, it support RJ45 network interface and standard DMX512 output interface. Artnet-DMX-1 can be configured in one of two ways: ArtNet convert into DMX512, or DMX512 convert into Artnet.

    € 245,77 -15% € 208,90
  • ARTNET-DMX-2

    ArtNet-DMX converter is the Ethernet Control System based on the ArtNet protocol, used to convert the Artnet network date package into DMX512 date, adopting high-speed ARM processor, stable and reliable working. Following Art-net standard protocol, it support RJ45 network interface and standard DMX512 output interface. Artnet-DMX-2 has two standard DMX512 date output port, output 1024 data in total.

    € 245,77 -15% € 208,90
  • ArtNet-SPI-1

    € 299,25 -15% € 254,36
Showing 1 - 0 of 1 item

CV DALI Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • LM-75-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 115,39 -15% € 98,08
  • LM-75-12-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 115,39 -15% € 98,08
  • LM-75-24-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 109,06 -15% € 92,70
  • LM-75-12-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 109,06 -15% € 92,70
  • LM-100-24-G1D2

    - Dimming interface: DALI, Push DIM. - Dimming range from 0-100%, LED start at 0.1% possible. - DALI dimming curve: Liner curve or logarithmic curve. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss < 0.5W Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 122,14 -15% € 103,82
  • LM-100-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Standby Power Loss: <0.5W - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 133,12 -15% € 113,15
  • LM-150-12-G1D2

    - Dimming interface: DALI 2.0, Push DIM - Dimming range from 0-100%, LED start at 0.1% possible. - 0~100% flicker-free, High frequency exemption level. - High Efficient driver. Efficiency 93%. PF>0.98, THD<6%. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing with design of dismountable end cover - DALI bus standard: IEC62386-101,102,207. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - Up to 50000-hour life time 5 years warranty(Rubycon capacitor)

    € 154,48 -15% € 131,31
  • LM-150-24-G1D2

    - Dimming interface: DALI 2.0, Push DIM - Dimming range from 0-100%, LED start at 0.1% possible. - 0~100% flicker-free, High frequency exemption level. - High Efficient driver. Efficiency 93%. PF>0.98, THD<6%. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing with design of dismountable end cover - DALI bus standard: IEC62386-101,102,207. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - Up to 50000-hour life time 5 years warranty(Rubycon capacitor)

    € 154,48 -15% € 131,31
  • LM-150-12-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Full protective plastic housing with design of dismountable end cover - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - 5 years warranty(Rubycon capacitor)

    € 154,68 -15% € 131,48
  • LM-150-24-G2D2

    - Dimming interface: DALI DT8, Push DIM/CCT - 2 independently SELV constant voltage output channels. - DALI DT8, DIM and color temperature adjusting driver. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - In line with the EU energy efficiency ERP directive, Standby Power Loss: <0.5W - Innovative thermal management technology, intelligent power life protection. - Full protective plastic housing with design of dismountable end cover - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application. - 5 years warranty(Rubycon capacitor)

    € 154,65 -15% € 131,45
Showing 1 - 0 of 1 item

CC DALI Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-20-250-1000-W2D2

    - Dimming interface: DALI DT8, Push DIM - T-PWM digital dimming. - Dimming range: 0~100%, LED start at 0.01% possible. - DALI DT8 CT adjustment driver. - 0-100% flicker-free (IEEE 1789 standard). - Innovative thermal management technology, intelligent power life protection. - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically. - In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W. - DALI bus standard: IEC62386-101,102, 209. Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ. - 5 years warranty (Rubycon capacitor).

    € 76,55 -15% € 65,07
  • SE-12-350-700-W1D

    - Dimming interface: DALI. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - DALI dimming curve: liner curve or logarithmic curve. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard.

    € 46,73 -15% € 39,72
  • SE-12-100-400-W1D

    - Dimming interface: DALI. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - DALI dimming curve: liner curve or logarithmic curve. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101,102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application forⅠ/Ⅱ/Ⅲ

    € 46,73 -15% € 39,72
  • DALI-25-150-900-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 81,87 -15% € 69,59
  • DALI-15-100-700-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 73,76 -15% € 62,70
  • DALI-36-200-1200-E1A1

    - Dimming interface: DALI, Push DIM - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - DALI dimming curve can be either linear or logarithmic. - Multi-current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - DALI bus standard: IEC62386-101, 102, 207. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 94,94 -15% € 80,70
  • DALI-50-500-1750-F1P1

    € 102,17 -15% € 86,84
  • LT-401-CC

    This Dali LED controller enables you to dim constant current High Power LED's. The driver has 1 output for up to 12 pcs. High Power LED's. This one controller can be used for 350, 700 and 1050mA simply by changing a switch on the driver.

    € 86,36 -15% € 30,23
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item

CV 0/1-10V Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • LM-75-12-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 89,98 -15% € 76,48
  • LM-75-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 89,98 -15% € 76,48
  • LM-75-12-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 93,93 -15% € 79,84
  • LM-75-24-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K. - Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 93,93 -15% € 79,84
  • LM-150-12-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM- Dimming range from 0-100%, LED start at 0.1% possible.- With soft-on and fade in function, visual more comfortable.- Automatic recognition of 0-10V, 1-10V input signal.- 0-100% flicker-free, High frequency exemption level. - High efficient driver: efficiency 93%, PF>0.98, THD<6%.- In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W- Innovative thermal management technology, intelligent power life protection.- Over-heat / Over voltage / Over load / Short circuit protection, recover automatically.- Fully-protected plastic housing with design of dismountable end cover.- Suitable for internal lights application for I/II/III- Up to 50000-hour life time.- 5 years warranty (Rubycon capacitor).- Ultra-low consumption of 0-10V ports: < 0.05mA.- Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable

    € 115,15 -15% € 97,88
  • LM-100-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM - Built-in SCM, dimming curve and smoothing time of power on can be customized. - Dimming range from 0-100%, LED start at 0.1% possible. - Automatic recognition of 0-10V, 1-10V input signal. 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 98,97 -15% € 84,12
  • LM-100-24-G2A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM/CCT - 0-10V DIM and color temperature adjusting driver, 2 independently SELV constant voltage output channels. - Constant power design, adjust different color temperature to keep the same brightness. - Dimming range from 0-100%, LED start at 0.1% possible. - Color temperature adjusting range: 2700-6500K. - Automatic recognition of 0-10V, 1-10V input signal. - 0~100% flicker-free, achieve the level of exemption assessment. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for indoor Ⅰ/Ⅱ/Ⅲ type lamps application.

    € 104,04 -15% € 88,43
  • LM-150-24-G1A2

    - Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM- Dimming range from 0-100%, LED start at 0.1% possible.- With soft-on and fade in function, visual more comfortable.- Automatic recognition of 0-10V, 1-10V input signal.- 0-100% flicker-free, High frequency exemption level. - High efficient driver: efficiency 93%, PF>0.98, THD<6%.- In line with the EU energy efficiency ERP directive, standby power consumption < 0.5W- Innovative thermal management technology, intelligent power life protection.- Over-heat / Over voltage / Over load / Short circuit protection, recover automatically.- Fully-protected plastic housing with design of dismountable end cover.- Suitable for internal lights application for I/II/III- Up to 50000-hour life time.- 5 years warranty (Rubycon capacitor).- Ultra-low consumption of 0-10V ports: < 0.05mA.- Dimming interface with photoelectric isolation, in line with the latest safety standards, more safe and reliable

    € 115,15 -15% € 97,88
Showing 1 - 0 of 1 item

CC 0/1-10V Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • SE-12-100-400-W1A

    - Dimming interface: 0-10V (1-10V/10VPWM/RX). - T-PWM digital dimming, present a perfect visual experience. Built-in SCM, dimming curve and     smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 31,27 -15% € 26,58
  • SE-12-350-700-W1A

    - Dimming interface: 0-10V (1-10V/10VPWM/RX). - T-PWM digital dimming, present a perfect visual experience. Built-in SCM, dimming curve and     smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Over-heat / Over voltage / Over load / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 31,27 -15% € 26,58
  • AD-25-150-900-E1A1

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push Dim. - T-PWM digital dimming, present a perfect visual experience. - Built-in SCM, dimming curve and smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multiple current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 62,72 -15% € 53,31
  • AD-15-100-700-E1A1

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push Dim. - T-PWM digital dimming, present a perfect visual experience. - Built-in SCM, dimming curve and smoothing time can be customized. - Automatic recognition of 0-10V, 1-10V input signal. - Dimming range: 0~100%, LED start at 0.01% possible. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multiple current & wide voltage, suitable for different power LED. - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Short circuit / Over-heat / Over load / Non-load protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 54,87 -15% € 46,64
  • AD-36-200-1200-E1A1

    € 66,27 -15% € 56,33
  • SE-20-250-1000-W2A2

    - Dimming interface: 0-10V (1-10V/10VPWM/RX), Push DIM. - T-PWM digital dimming, present a perfect visual experience. - With soft-on and fade in function, visual more comfortable. - Achieve dimming or CT adjustment for 1CH 0-10V or 2CH 0-10V. - Dimming range: 0~100%, LED start at 0.1% possible.  - Automatic recognition of 0-10V, 1-10V input signal. - DIP switch for 16 optional currents' quick selection. - 0-100% flicker-free, High frequency exemption level. - Ultra-low consumption of 0-10V ports: <0.05mA. - In line with the EU energy efficiency ERP directive, standby power consumption <0.5W. - Innovative thermal management technology, intelligent power life protection.  - Over temp. / Over voltage / Over load / Short circuit protection, recover automatically.  - Non-load output voltage 0V to prevent damages to LED caused by poor contact. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.  - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor).

    € 55,28 -15% € 46,99
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item

CV Triac Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • LM-75-12-G1T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - Built-in SCM, dimming curve and smoothing time can be customized. - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III.

    € 91,35 -15% € 77,65
  • LM-75-12-G2T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - With soft-on and fade in function, visual more comfortable. - 2 independently SELV constant voltage output channels. - Constant power design, adjust brightness and color temperature synchronously - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - High Efficient driver: efficiency 88%,PF>0.98, THD<6%  - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III. - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor)

    € 95,37 -15% € 81,06
  • LM-75-24-G2T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - With soft-on and fade in function, visual more comfortable. - 2 independently SELV constant voltage output channels. - Constant power design, adjust brightness and color temperature synchronously - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - High Efficient driver: efficiency 88%,PF>0.98, THD<6%  - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III. - Up to 50000-hour life time. - 5 years warranty (Rubycon capacitor)

    € 95,37 -15% € 81,06
  • LM-75-24-G1T2

    - Leading edge (Triac), Trailing edge (ELV) phase-cut and Push DIM/CCT. - Built-in SCM, dimming curve and smoothing time can be customized. - Dimming range: 0~100%, LED start at 0.1% possible. - 0-100% flicker-free (IEEE 1789 standard). - Innovative thermal management technology, intelligent power life protection. - Over load / Over temp. / Short circuit / Over voltage protection, recover automatically.- Suitable for internal lights application for I/II/III.

    € 91,35 -15% € 77,65
  • TD-150-24-E1M1

    € 100,50 -15% € 85,43
  • TD-150-12-E1M1

    € 100,50 -15% € 85,43
  • TD-10-MR16

    - Dimming interface: Triac/ELV - Apply to leading edge / trailing edge Triac dimmers and dimming system. - Built-in singlechip, dimming curve and smoothing time can be customized. - Dimming range: 0~100%, LED start at Max. 1% possible. - Over load / Over-heat protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 25,20 -15% € 21,42
Showing 1 - 0 of 1 item

CC Triac Dimmable Driver

LTECH Intelligent dimmable led driver have excellent performance:

- Fully Digital circuit design, excellent performance and long working life
- PWM digital dimming, maintain the best LED’s CRI(color rendering index)
- DALI bus standard: IEC62386,standard DALI logarithmic dimming curve
- 60000:1 wide dimming range, 0-100% full dimming range,LED start at 0.1% possible
- Power factor>0.99, Efficiency>86%, THD(Total Harmonic Distortion)<10%
- Short circuit / Over-temperature / Over load protection
- Current consistent in multi LED driver working, balanced light
- Class 2 security isolation power supply
- Compliant with SELV(Safety Extra Low Voltage) standard

  • TD-15-150-700-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ

    € 48,83 -15% € 41,51
  • TD-25-200-900-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ

    € 61,01 -15% € 51,86
  • TD-10-350-700-E1P1

    A Constant current TRIAC driver with built-in power supply. Directly connectable at 100-240 volts. Sends out PWM dimming and has a power load from 2.1 to 9.8W, 700mA current and a voltage range of 3 to 14VDC.NOTE! This product comes in 700mA!! Is also available on request in 350mA, 400mA, 450mA, 500mA, 550mA, 600mA or 650mA versions. To request, send an email to info@ltech-led.eu or sales@inventdesign.nl

    € 29,50 -15% € 25,08
  • TD-36-450-1200-EFP1

    - Support Leading edge (Triac), Trailing edge (ELV) and Push Dimmer. - Built-in SCM, dimming curve and smoothing time can be customized. - T-PWM digital dimming, present a perfect visual experience. - Dimming range: 0~100%, dimming depth: Max. 0.01%. - Flicker-free (IEEE 1789), achieve the level of exemption assessment. - Innovative thermal management technology, intelligent power life protection. - Multi-current & wide voltage, suitable for different power LED. - Over load / Over-heat / Short circuit protection, recover automatically. - Class 2 power supply. Full protective plastic housing. - Compliant with Safety Extra Low Voltage standard. - Suitable for internal lights application for Ⅰ/Ⅱ/Ⅲ.

    € 65,50 -15% € 55,68
  • TD-10-100-400-E1P1

    A Constant current TRIAC driver with built-in power supply. Directly connectable at 100-240 volts. Sends out PWM dimming and has a power load from 3.5 to 9.8W, 350mA current and a voltage range of 10 to 28VDC.NOTE! This product comes in 350mA!!Is also available on request in 100mA, 150mA, 200mA, 250mA, 300mA or 400mA versions. To request, send an email to info@ltech-led.eu or sales@inventdesign.nl

    € 29,50 -15% € 25,08
Showing 1 - 0 of 1 item
  • EBOX-TD

    EBOX-TD wireless module applies L-BUS wireless communication protocol and converts it into trailing edge dimming signal through RF wireless communication technology, which is used together with LTECH Triac LED driver and compatible with all Triac series products in the market. Rely on L-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it more easier for new or retrofit installations.

    € 63,92 -15% € 54,33
Showing 1 - 0 of 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

  • WiFi-106

    L-BUS is a WiFi lighting control system, consisted of APPs and WiFi controller. Controls various types of LED lighting products by installing the related App on our Android or iOS mobile devices which support WiFi connection. With DIM, CT adjustment, RGB and RGBW changing 4 in 1 operation, plus 12 zones control function, you can connect directly or by a router.

    € 258,60 -15% € 219,81
  • WiFi-108

    - Realize global long-range control by cloud platform. - 2 in 1 control: Wireless RF and wired connection. - Multi-zones dimming, color changing and multi-groups control. - One click scene function, timing function. - Advanced lighting program setting, sunrise or sunset effect or any other changing effect could be simulated - Support mobile phone, remote control and dimming panel to control all lighting effects. - Voice control, support amazon ECHO and TmallGenie smart speaker. - Opened third party communication interface: Trigger contacts.

    € 345,00 -15% € 293,25
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
  • E1

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 58,91 -15% € 50,07
  • E1S

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 62,95 -15% € 53,51
  • E2

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 67,57 -15% € 57,43
  • E3

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 71,61 -15% € 60,87
  • E3S

    - 2 in 1 function: RF wireless control and PWM power output. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color circle makes LED dimming selection more user-friendly. - Power output, lamps can be connected directly, easy and convenient. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 83,16 -15% € 70,69
  • E4

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - Touch keys with chord and LED indicator. - Save any scene you like, touch 1 key to recall scene, easy and convenient. - Adopts capacitive touch control technology on the full color slider, makes LED color selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 86,50 -15% € 73,53
  • E4S

    With this wall control panel you can control RGB light directly from the PWM output at the back of the panel or via RF using a separate available RF receiver. By touching the mode icon you can switch between various presets like gradient color change or even more exciting effects.  2 in 1 function: RF wireless control and PWM power output. Power output, lamps can be connected directly, easy and convenient. Touch keys with chord and LED indicator. Adopts capacitive touch control technology on the full color panel, makes LED color selection more user-friendly. Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 88,00 -15% € 74,80
  • E5S

    - 2 in 1 function: RF wireless control and PWM power output. - Power output, lamps can be connected directly, easy and convenient. - RGB, RGBW, RGB+CT LED lights can be controlled. - Touch keys with chord and LED indicator. - Adopts capacitive touch control technology on the full color panel, makes LED color selection more user-friendly. - Touch panel can be controlled by remote directly or smart phone if add a gateway.

    € 94,90 -15% € 80,67
Showing 1 - 0 of 1 item
  • EBOX-AD

    EBOX-AD wireless module applies to L-BUS wireless communication protocol and converts into 0-10V signal through RF wireless communication technology, which is used with LTECH 0-10V LED driver and compatible with all 0-10V series products on the market. Relying on L-BUS wireless technology, removing complex layout and expensive technical cost, making new or retrofit projects installation easier.

    € 63,92 -15% € 54,33
  • EBOX-TD

    EBOX-TD wireless module applies L-BUS wireless communication protocol and converts it into trailing edge dimming signal through RF wireless communication technology, which is used together with LTECH Triac LED driver and compatible with all Triac series products in the market. Rely on L-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it more easier for new or retrofit installations.

    € 63,92 -15% € 54,33
  • EBOX-AP

    EBOX-AP wireless repeater applies LT-BUS wireless communication protocol for wireless signal extension, it is not necessary to pair via its factory default setting, greatly ensures its stability and wide controlling area among LT-BUS wireless communication devices, removing the complex cabling procedure, to make it become more easier for new or retrofit installations.

    € 70,03 -15% € 59,53
  • EBOX-DMX

    EBOX-DMX wireless module applies LT-BUS wireless communication protocol and converts it to DMX512 through RF wireless communication technology, which is used with the LTECH DMX512 LED driver and compatible with all DMX products on the market. Rely on LT-BUS wireless technology application, it has removed the complex cabling procedure and expensive technical commissioning fee, to make it become more easier for new or retrofit installations.

    € 63,92 -15% € 54,33
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item

Tuya Bluetooth Driver

LTECH & Tuya work collectively together to develop "Tuya Bluetooth Driver" for intelligent IoT commercial lighting market. It adopts Bluetooth Mesh Ad-hoc Network and Tuya application protocol with high networking capability which are reliable and stable. Meanwhile, it applies LTECH original super depth digital dimming technology T-PWM that allows continuous and flicker-free images with high-speed shooting. Its soft-on and fade-in function aligns with Human-centric Lighting requirements which greatly enhances visual comfort. Multiple CV&CC drivers are available and meet various applications for different light fixtures.

Showing 1 - 0 of 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

  • WiFi-104

    The LED Controller WiFi-104 is renewed! You can easily controle your Single Color or MultiColor (RGB and RGBW) LED lighting when using the free app. Control up to 12 different zones. The LED Controller WiFi-104 is improved because itâs possible to link to an existing wireless network, and a private network can be created. Download the free app and discover the possibilities! Apple Store Google Play Store.

    € 186,00 -15% € 158,10
Showing 1 - 0 of 1 item
  • UX5

    The UX5 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX5 has four zones. You can save your setting with the buttons I or II. The UX5 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX5 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX5 can collaborate via RF 2.4GHz with the V5 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX5 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX5 has a universal backplate for all kind of wall boxes.

    € 130,66 -15% € 45,73
  • UX8

    The UX8 LED Dimmer Touch panel gives you the opportunity to easily control your RGBW LED lights. You can choose the colors by moving your finger over the color wheel in the middle. In addition, the UX8 has four zones which can be selected via the buttons 1 to 4 at the top of the panel, you can create scenes and store them with the buttons I to IV, there is a mode feature with 11 different modes, brightness control by zone, speed function and separate brightness control per color. To control the white light there is the W button by pressing it briefly the white light goes on or off, and by keeping it pressed you can dim the white light. The UX8 sends a DMX or a 2.4GHz RF signal. Through the DMX signal the 4 zones can be controlled by connecting DMX controllers + LED control lights. DMX controllers which can be used for this are the LT-840-6A or LT-820-5A. Via the 2.4GHz RF signal the four zones can be wirelessly controlled, here you connect the UX8 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX8 can collaborate via RF 2.4GHz with the V8 remote, making it to operate remotely as well as manually the four zones on the panel. Via a WiFi signal, it is possible to connect the UX8 with the WiFi-104. This makes it possible to operate the four areas next to the wall panel and remote control via the app on your phone or tablet. The UX8 has a universal backplate for all kind of wall boxes.

    € 152,15 -15% € 129,33
  • UX1

    The UX1 LED Dimmer Touch panel gives you the opportunity to easily Dim your LED lights. You can select the brightness by moving your finger over the bar in the middle. In addition, the UX1 has four shortcut keys which give you the opportunity to select 25%, 50%, 75% or 100% brightness. You can save your setting with the buttons I or II. The UX1 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-801-12A or LT-811-12A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX1 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX1 can collaborate via RF 2.4GHz with the V1 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX1 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX1 has a universal backplate for all kind of wall boxes.

    € 102,93 -15% € 36,03
  • UX2

    The UX2 LED Dimmer Touch panel gives you the opportunity to easily set the Color Temperature and Dim your Adjustable LED lights. You can select the Color Temperature by moving your finger over the bar in the middle and the Brightness with the BRT+ and BRT-. In addition, the UX2 has four shortcut keys which give you the opportunity to select modes that represent Sunrise, Day, Sunset and Night. You can save your setting with the buttons I or II. The UX2 sends a DMX or a 2.4GHz RF signal. Through the DMX signal it can be controlled by connecting DMX controllers. DMX controllers which can be used for this are the LT-803-8A or LT-820-5A. Via the 2.4GHz RF signal it can be wirelessly controlled, here you connect the UX2 with R4-5A or R4-CC receiver. When using PWM Constant Voltage LED lighting you need the LED Receiver R4-5A and when using Constant Current lighting, you need the R4-CC, where you have the choice of 350mA / 700mA / 1050mA control. The UX2 can collaborate via RF 2.4GHz with the V2 remote, making it possible to operate remotely as well as manually. Via a WiFi signal, it is possible to connect the UX2 with the WiFi-104. This makes it possible to control via the app on your phone or tablet. The UX2 has a universal backplate for all kind of wall boxes.

    € 116,56 -15% € 40,80
Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item
  • R4-5A

    The LED Receiver R4-5A can be used in combination with Wifi 104 DX5 or DX8 controller. It has four outputs and can be placed up to 50 meters in an open environment from the WiFi-104 and 30 meters from the DX5 or DX8 within an open enviroment. Consider walls and other obstacles, which reduces the range.

    € 86,36 -15% € 73,41
  • R4-CC

    The LED Receiver R4-CC can be used in combination with Wifi-104, DX5 or DX8 controller. It has 4 Constant Current outputs 350mA/700mA/1050mA and can be placed 30 meters from the DX5 or DX8. And up to 50 meters from the WiFi-104. Keep in mind the range will be reduced with walls and other obstacles.

    € 86,36 -15% € 73,41
Showing 1 - 0 of 1 item

WiFi Controller

WiFi Controller is a versatile office/home lighting control system. Through WiFi function build-in mobile devices could control various types of LED lighting products after installing related software on our ios or Android phones, tablet PCs and other mobile devices. It makes the led lighting control more intelligence, networking and humanization.

Showing 1 - 0 of 1 item
Showing 1 - 0 of 1 item