Stand-Alone 

Subcategories

D-Series

D-Series

DX-Series

DX-Series

EX-Series

EX-Series

UX-Series

UX-Series

K-Series

K-Series

M-Series Remotes

M-Series Remotes

T-Series Remotes

T-Series Remotes

V-Series Remotes

V-Series Remotes

F-Series Remotes

F-Series Remotes

per page

R4-3A

LED receiver for WiFi-104, DX-series Touch panels and V-series remotes.  Able to connect all kind Constant Voltage strips; Single Color, CT, RGB and RGBW.

D1

The D1 LED Controller for Single Color LED products and has 3 x 4A outputs up to 12A. The brightness can be determined by means of the Touch Circle or the arrow keys left and right. It can be left under the 30 second fade to on and off, for the in-and turn off the lights. Among the key directly below a preset can be stored.

T1 RF REMOTE

The LED Dimmer Remote transmits a Radio Frequency signal and has a 30 meter range. The SingleColor Flex strip can be easily dimmed with the touch remote. The remote is chargeable by means of a USB cable. The remote can be used with multiple receivers, which you can control as individual zones. A maximum of 8 individual zones can be addressed with one...

M1+M3-3A

The LED Dimmer Remote RF Mini 1 uses a Radio Frequency signal at 433.92 MHz and can reach about 40-50 meters. LED Strips can be easily dimmed with the touch remote. The 3x3A LED Receiver RF Mini is included with this product.

T2 RF REMOTE

This Dimmer remote is suitable to dim a LED strip with 2 colors LED or 2 SingleColor FlexStrips. The remote transmits a Radio Frequency signal and has a 30 meter range. The LED can be easily dimmed with the touch remote. The remote is chargeable by means of a USB cable. The remote can be used with multiple receivers, but it's not possible to control them...

M2+M3-3

The LED Dimmer Remote RF Mini 2 uses a Radio Frequency signal at 433.92 MHz and can reach about 40-50 meters. This remote control is suitable for LED strip with two colors or two separate Single Color LED Strips. LED Strips can be easily dimmed with the touch remote. The LED Dimmer Remote RF Mini 3 comes along with 3x3A LED Receiver RF Mini.

R4-5A CV

The LED Receiver R4-5A can be used in combination with Wifi 104 DX5 or DX8 controller. It has four outputs and can be placed up to 50 meters in an open environment from the WiFi-104 and 30 meters from the DX5 or DX8 within an open enviroment. Consider walls and other obstacles, which reduces the range.

D2

The D2 LED Controller is suitable for Adjustable white LED strip or a combination of wam white and neutral white LED strip. It has 2 outputs of each 4A for a total 8A. The brightness can be set with the touch circle or the arrow keys left and right. In the left bottom corner you can choose for if you want the 2 colours to fade over or if you would like to...

Showing 1 - 12 of 86 items